Setting Up The Zone Function - Yamaha MONTAGE M6 Operation Manual

Setting up the Zone function

The Zone function enables control of multiple external devices from the built-in keyboard on this
instrument.
On the MONTAGE M, you can use up to eight Zones per Performance.
For example, you can use this function to switch between the internal tone generator (tone
generator block) and connected external sound modules by velocity or note range.
1
Press the [PERFORMANCE] button to open the Performance screen.
2
Select a Part and open the screen from [EDIT/
Zone Settings.
The Zone Settings screen appears.
3
Check the Part Mode setting.
Select Internal to play the sound from the tone generator block, and External to play the
sound from the external sound module.
NOTE
You can also use a shortcut for changing the Part Mode setting. When [PART SELECT] is on, quickly
pressing the corresponding PART button twice (double-clicking) switches between Internal and
External settings.
4
If necessary, set the parameters for Tx/Rx Ch (Transmit-Receive Channel)
and Note Limit.
91
om01basicoperation0300
] → General/Pitch →