Yamaha MONTAGE M6 Operation Manual page 328

Hold Level (FEG Hold Level)
Sets the Cutoff Frequency at the moment you press the key.
Settings: −128–+127
Attack Level (FEG Attack Level)
Sets the Cutoff Frequency value to change after you press the key.
Settings: −128–+127
Decay1 Level (FEG Decay 1 Level)
Sets the next Cutoff Frequency value to change from the Attack Level.
Settings: −128–+127
Decay2 Level (FEG Decay 2 Level)
Sets the Cutoff Frequency that is maintained while the key is held down.
Settings: −128–+127
Release Level (FEG Release Level)
Sets the next Cutoff Frequency value after you release your finger from the key.
Settings: −128–+127
Center Key (FEG Time Key Follow Sensitivity Center Key)
Sets the reference note (or a key to press) for Time/Key.
With the note (key) set here, the change speed of the cutoff frequency set in Filter EG is used
as is.
Time/Key (FEG Time Key Follow Sensitivity)
Sets how the speed of the frequency change in FEG responds to the position of the key.
The change speed in FEG is used for the specified key in Center Key.
Settings: −64–+63
Positive values: The lower the key played, the slower the FEG change becomes; the
higher the key played, the faster the FEG change becomes.
Negative values: The lower the key played, the faster the FEG change becomes; the
higher the key played, the slower the FEG change becomes.
0: No changes to the FEG regardless of the key position.
Time/Key and Center Key
328