Yamaha MONTAGE M6 Operation Manual page 230

Operation
[PERFORMANCE] → Common selection → [EDIT/
(When a selected Part is Common) [SHIFT] + [MSEQ ON/OFF]
Common Swing (Swing Offset)
Sets the swing value of the Arpeggio and Motion Sequencer for the Performance.
This is specified as an offset value to the Part Swing.
Settings: −120–+120
Common Unit (Common Unit Multiply)
Sets the percentage for stretching or compressing the Motion Sequencer playback time for the
entire Performance.
This parameter affects Lanes for which Unit Multiply is set to Common.
The subdivision of the beat and the tempo will change when you stretch or compress the
playback time, so you can create a completely new feel for the originally selected Motion
Sequencer.
Settings: 50%–400%
200%: The playback time is doubled, and the tempo is halved as a result.
100%: The playback time is kept unchanged.
50%: The playback time is halved, and the tempo is doubled as a result.
Common Amplitude (Motion Sequencer Amplitude Performance Offset)
Sets the Motion Sequencer Amplitude (or how much the Sequence changes) for the entire
Performance.
This is specified as an offset value to the Part Amplitude (Part Motion Sequencer Amplitude).
This parameter value offsets the Amplitude of the Lanes within the Performance if MS FX is set
to On for the Lane.
Settings: −127–+127
] → Arp/MS → MS Common
230