Yamaha MONTAGE M6 Operation Manual page 485

Sets the number of count-in measures from the time the [
recording actually starts when recording a Song or Pattern.
Settings: Off (recording starts when you press the [
NOTE
Since the click sound uses the internal Tone Generator, the use of the click sound affects the overall
polyphony of the instrument.
Volume (Click Volume)
Sets the volume of the click sound.
Settings: 0–127
Beat (Click Beat)
Sets the beat at which the click sound is played.
Settings: 1/16 (sixteenth notes), 1/8 (eighth notes), 1/4 (quarter notes), 1/2 (half notes), Whole
(whole notes)
Type (Click Type)
Selects the type of click sound.
Settings: 1–10
Sync Quantize (Arpeggio Synchro Quantize Value)
Adjusts the timing for starting the next Arpeggio when playing back an Arpeggio for multiple
Parts. When set to Off, the Arpeggio is played back when you play the Part on the keyboard.
Settings: Off, 60 (thirty-second note), 80 (sixteenth note triplet), 120 (sixteenth note), 160
(eighth note triplet), 240 (eighth note), 320 (quarter note triplet), 480 (quarter note)
Click Out (Click Output Select)
Sets the output destination for the click sound.
Settings: MainL&R, AsgnL&R, USB1&2–USB29&30, AsgnL, AsgnR, USB1–USB30
MainL&R: Outputs in stereo (two channels) to the OUTPUT [L/MONO] and [R] jacks.
AsgnL&R: Outputs in stereo (two channels) to the ASSIGNABLE OUTPUT [L] and
[R] jacks.
USB1&2–USB29&30: Outputs in stereo (channels 1 and 2, to channels 29 and 30) to
the [USB TO HOST] terminal.
AsgnL: Outputs in mono (one channel) to the ASSIGNABLE OUTPUT [L] jack.
AsgnR: Outputs in mono (one channel) to the ASSIGNABLE OUTPUT [R] jack.
USB1–30: Outputs in mono (channels 1 to 30) to the [USB TO HOST] terminal.
] (Play) button is pressed until
] (Play) button), 1meas–8meas
485