Table of Contents
Advertisement
Turning the instrument ON
Turning the instrument OFF
Make sure the volume settings of the instrument and external devices, such as powered speakers, are turned to the minimum
before turning the power on. When connecting the instrument to powered speakers, turn on the power switch of each device in
the following order.
„ When turning the power on
First, the instrument (displays will turn on and buttons will light), and then the connected powered speakers.
„ When turning the power off
First, the connected powered speakers, and then the instrument (displays will turn off and buttons will turn off).
Keep in mind that the [STANDBY/ON] switch is located at
the right side (from the view of the keyboard) of the AC IN
socket on the rear panel of the instrument.
WARNING
Even when the [STANDBY/ON] switch is in standby status,
electricity is still flowing to the product at the minimum level.
Remove the electric plug from the outlet when the instrument is
not to be used for extended periods of time, or during electrical
storms.
Auto Power Off function
To prevent unnecessary power consumption, this instrument features an Auto Power Off function that automatically turns the
power off if the instrument is not operated for a specific period of time.
„ Auto Power Off setting
You can enable the Auto Power Off function and select the time setting for activating the function.
Procedure
[UTILITY] g Settings g Advanced g Auto Power Off
Settings (in minutes)
Off (Auto Power Off disabled), 5, 10, 15, 30, 60, 120
Default
Off (Auto Power Off disabled)
„ Disabling Auto Power Off (simple method)
Turn the power on while holding down the lowest key on the keyboard.
An Auto power off disabled message appears briefly and Auto Power Off
is disabled. The setting is retained even if the power is turned off.
NOTICE
The setting will revert to its default value if not backed up before the power
is turned off.
• When the instrument is not operated for a specified period of time while
connected to an external device such as an amplifier, speaker or computer,
make sure to follow the instructions in this Quick Guide to turn off the power to the instrument and the connected devices in the proper
sequence to protect the devices from damage. If you do not want the power to turn off automatically when a device is connected,
disable Auto Power Off.
• When Auto Power Off is set to off, the value will be retained even if the backup data saved on another device is loaded to the instrument.
When Auto Power Off is set to something other than off, the value will be overwritten with loaded data.
NOTE
• The setting time is approximate.
• To turn the power on after Auto Power Off has been carried out, press the [STANDBY/ON] switch.
• When the factory settings are restored, the setting time is changed to the default value (off).
[STANDBY/ON]
switch
[AC IN] jack
MONTAGE M Quick Guide
31
Advertisement
Table of Contents
