Yamaha MONTAGE M6 Operation Manual page 314

Hide thumbs Also See for MONTAGE M6:
Table of Contents

Advertisement

Sets the Main category and Sub category of the selected Waveform.
Settings: Refer to the Data List.
Name (Waveform Name)
You can save the Waveform you are editing under a new name, using up to 20 alphanumeric
characters. Tapping on the name calls up the onscreen keyboard, allowing you to enter a name.
Total
Shows the number of Key Banks in the waveform and the total size of the data capacity.
Keybank (Keybank Number)
Shows the Key Bank number.
Size (Keybank Size)
Shows the total size of data capacity.
Channel (Keybank Channel)
Shows whether the Key Bank is stereo or mono.
Velocity Limit
Sets the velocity range (lowest and highest values) for playing the Key Bank.
Settings: 1–127
Note Limit
Sets the note range (lowest and highest notes) for playing the Key Bank.
Settings: 1–127
Center Note
Sets the key (pitch) of the original waveform data.
Settings: C−2–G8
Volume
Sets the volume of the Key Bank.
Settings: 0–255
Pan
Sets the Pan position (in the stereo field) of the Key Bank.
Settings: L63 (left)–C (center)–R63 (right)
314

Advertisement

Table of Contents
loading

This manual is also suitable for:

Montage m7Montage m8x

Table of Contents