Yamaha MONTAGE M6 Operation Manual page 74

4
Set the Trigger Level (5).
If you set the Trigger Level to manual, recording will begin whenever you press the [
(Play) button.
Alternatively, if you set Trigger Level to a value between 1 and 127, recording will begin
automatically after you have pressed the [
volume exceeds that level.
The level set here will be indicated by blue triangles in the level meter (4). For best
results, set this parameter as low as possible to capture the entire signal, but not so low
as to record unwanted noise.
5
Press the [
If you have set the Trigger Level to manual, recording will begin immediately right after
you press the [
red, and the [
If you have set a value between 1 and 127 as the trigger level, the recording will begin
automatically whenever the playback volume exceeds that level.
6
Play the keyboard.
If you set the Trigger Level to a value between 1 and 127, recording will begin
automatically whenever the playback volume exceeds that level.
7
When you have finished playing, press the [
The recorded audio file will be saved to the USB flash drive.
] (Play) button.
] (Play) button. While recording, the [
] (Play) button will light in green.
] (Play) button and then whenever playback
] (Record) button will light in
] (Stop) button.
74
]