Yamaha MONTAGE M6 Operation Manual page 231

Common Shape (Motion Sequencer Pulse Shape Performance Offset)
Sets the Motion Sequencer Pulse Shape (or the shape of the step curve) for the Performance.
This is specified as an offset value to the Part Shape (Part Motion Sequencer Pulse Shape).
This parameter value offsets the parameters for the Lanes within the Performance if the MS FX
is set to On for the lane and Control is set to On.
Settings: −100–+100
Common Smooth (Motion Sequencer Smoothness Performance Offset)
Sets the Motion Sequence Smoothness (or the smoothness of the changes in the sequence
over time) for the entire Performance.
This is specified as an offset value to the Part Motion Seq Smooth (Part Motion Sequencer
Smoothness).
This parameter value offsets the Smoothness of the Lanes within the Performance if MS FX is
set to On for the Lane.
Settings: −127–+127
Common Random (Motion Sequencer Randomness Performance Offset)
Sets the Motion Sequencer Randomness (or the randomness of the changes in the step value
of the sequence) for the entire Performance.
This is specified as an offset value to the Part Motion Seq Random (Part Motion Sequencer
Randomness).
This parameter value offsets the Randomness of the Lanes within the Performance if MS FX is
set to On for the Lane.
Settings: −127–+127
View Lane (Motion Seq View Lane)
Sets the Motion Seq Lane that is shown when the View Mode of the Home screen is set to
Motion Seq.
Settings: Super Knob, 1–4
AD MS Random (A/D Part Motion Sequencer Randomness)
Sets the randomness of the changes in A/D Part Motion Sequencer Step Value.
Settings: 0–127
MS Select (Motion Sequence Select)
Changes the Motion Sequence selection.
Settings: 1–8
231