Table of Contents
Advertisement
+1 and higher: Moved behind the beat.
-1 and lower: Moved ahead of the beat.
0: Does not change the even-numbered beats or add any swing feel.
This setting is useful for creating desired rhythms for playing swing, shuffle, and bounce feels.
Settings: −120–+120
Part Unit (Arpeggio Unit Multiply)
Sets the percentage for stretching or compressing the Arpeggio playback time for the Part.
The parameter setting is effective when the Unit Multiply of each Lane is set to Arp.
Settings: 50%–400%, Common
200%: The playback time is doubled, and the tempo is halved as a result.
100%: The playback time is kept unchanged.
50%: The playback time is halved, and the tempo is doubled as a result.
Common: The value set in the Unit Multiply common to all Parts is applied.
Part Amplitude (Part Motion Sequencer Amplitude)
Sets the Motion Sequencer Amplitude for the Part.
This is specified as an offset value to the Motion Sequencer Amplitude for each Lane.
This parameter value offsets the Amplitude of the Lanes within the Part if the MS FX is set to On
for the lane.
Settings: −127–+127
Part Shape (Part Motion Sequencer Pulse Shape)
Sets the Motion Sequencer Pulse Shape for the Part.
This is specified as an offset value to the Motion Sequencer Step Curve parameter for each
Lane.
This parameter value offsets the parameters for the Lanes within the Part if the MS FX is set to
On for the lane and Control is set to On.
Settings: −100–+100
Part Motion Seq Smooth (Part Motion Sequencer Smoothness)
Sets the Motion Sequencer Smoothness for the Part.
This is specified as an offset value to the Motion Sequencer Smoothness for each Lane.
This parameter value offsets the Smoothness of the Lanes within the Part if MS FX is set to On
for the Lane.
Settings: −127–+127
Part Motion Seq Random (Part Motion Sequencer Randomness)
Sets the Motion Sequencer Randomness for the Part.
Sets randomness of the changes in the Step value of the sequence.
282
Advertisement
Chapters
Table of Contents
