Scene - Yamaha MONTAGE M6 Operation Manual

Shows the level of Parts 1 to 8 and Audio Part.

Scene

On the Scene screen, you can register the settings for the Arpeggio type, Motion Sequence
type, and Part parameters to each of the SCENE buttons.
On this screen, set the appropriate Memory (Memory Switch) On, and edit the desired
parameter values so that you can save the settings to the Scene.
NOTE
The Scene function can be set from a screen other than Scene. You can change the assigned Scene
parameters by moving the corresponding knobs and sliders and registering the settings by simultaneously
holding down the [SHIFT] button and pressing the desired SCENE button.
Operation
[PERFORMANCE] → Scene
(1) Scene Select
Scene Select
Select a Scene tab to register the settings.
The Scene1 to Scene8 tabs are linked to the SCENE buttons on the top panel.
Settings: 1–8
Memory (Memory Switch)
Selects each of the parameter values such as Arpeggio, Motion Sequencer, Super knob, Super
knob link, Mixing, Keyboard Control, Amplitude EG, and Arp/MS FX to register to the Scene.
When these switches are set to Off, the parameter values will not be shown on the display even
when the corresponding tabs are selected.
138