Table of Contents
Advertisement
Operator Settings screen (page 2)
1
2
3
1
LEVEL
VEL.S (Velocity
2
Sensitivity)
-127 (SQUARE) to
3
FB (Feedback)
0 to +127 (SAW)
KSC-Rate
4
(Keyboard
Scaling Rate)
KSC (Keyboard Scaling) level setting (page 3)
With keyboard scaling, you can adjust the effect of the envelope based on the area of the keyboard being played. In this way, it is
possible to achieve a balance between tone and volume that is similar to that of acoustic instruments. The keyboard is divided in
two at the break point (fixed at C3 on the reface DX). The high-pitch side at the right is set by using the R Depth and the R
Curve; the low-pitch side at the left is set by using the L Depth and the L Curve.
1
2
3
L
Break point (C3)
1
L Depth
-127 to 0 to +127
LIN (Linear)
2
L Curve
EXP (Exponential)
LIN (Linear)
3
R Curve
EXP (Exponential)
4
R Depth
-127 to 0 to +127
4
Sets the output level.
In the case of carriers, this changes the volume.
0 to 127
In the case of modulators, this changes the degree to which the carrier(s) are
modulated.
This value is also displayed when you press the [LEVEL] button.
Used to change the volume and/or tone based on how hard you play the keys.
0 to 127
There is no change when the setting is "0" . The higher the value, the greater the
degree of change.
Selects the feedback level.
From "+1" to "+127" , the waveform changes from sine to sawtooth; from "-1" to
"-127" , it changes from sine to square.
At "0" , no feedback is applied and the waveform retains its normal sine shape.
This value is also displayed when you press the [FB] button.
Sets how the speed of the EG changes based on the area of the keyboard being
0 to 127
played. The higher the value, the faster the EG changes for the high-pitch side
compared with the low-pitch side.
4
R
Sets the degree of keyboard scaling at the left side of the keyboard. When set to "0" , no
keyboard scaling is applied.
The depth changes in a linear fashion from the break point to the left of the keyboard.
The depth changes in an exponential fashion from the break point to the left of the key-
board.
The depth changes in a linear fashion from the break point to the right of the keyboard.
The depth changes in an exponential fashion from the break point to the right of the
keyboard.
Sets the degree of keyboard scaling at the right side of the keyboard. When set to "0" ,
no keyboard scaling is applied.
Break point (C3)
C2
+127
LIN
EXP
Depth
0
EXP
LIN
-127
L Curve
C5
LIN
EXP
EXP
LIN
R Curve
4
reface Reference Manual
Advertisement
Table of Contents
