System
On the System screen, you can set the parameters related to the entire instrument.
Operation
[UTILITY] → Settings → System
[UTILITY] + [DAW REMOTE] (→ Calibrate Touch Panel setting)
Power on Mode
Sets the screen to be shown on the display when the instrument is turned on.
Settings: Perform, Live Set
Calibrate Ribbon Controller
Opens the screen for ribbon controller calibration.
Use it when the ribbon controller does not respond correctly.
Calibrate Touch Panel
Opens the screen for touchscreen calibration.
Use it when the touchscreen does not respond correctly.
Initial Live Set Bank (Initial Live Set Bank)
Initial Live Set Page (Initial Live Set Page)
Initial Live Set Slot (Initial Live Set Slot)
When Power On Mode is set to Live Set, use this parameter to set the initial Live Set Slot to be
selected after startup.
471