Yamaha MONTAGE M6 Operation Manual page 40

for these Performances.
Workflow
Select sound for Parts 1 to 3 (Step 1)
Set up the Super Knob to allow the control of the parameters for Parts 1 to 3 (Steps 2 to 4)
Check the settings (Step 5)
Set the parameters for the Super Knob for the leftmost, mid, and rightmost positions. (Steps 6
to 8)
1
Select sounds for Parts 1 to 3
1-1. Press the [CATEGORY] button and select CFX PopStudioGrand.
1-2. From the Home screen, tap the [+] icon Part 2 to open the Part Category
Search screen and select AN-X Sine Pad PAT.
1-3. From the Home screen, tap the [+] icon on Part 3 to open the Part Category
Search screen and select TV Show FM EP.
2
Set the parameters for Part 1.
2-1. Select Part 1.
2-2. Press the [CONTROL ASSIGN] button while holding down the [SHIFT] button.
The Control View screen appears.
2-3. Turn the Super Knob.
The Control Assign screen appears.
2-4. By tapping the [+] icon, Destination 10 will be added.
40