Yamaha MONTAGE M6 Operation Manual page 484

When this parameter is set to off, a tempo setting for each Performance is used.
When set to on, the current tempo is retained when you change the Performance.
Settings: Off, On
Tap Tempo
You can set the desired tempo by tapping the area shown on the screen or by pressing
(tapping) the [ENTER] button on the top panel while the cursor is on this parameter.
Or you can use the [TEMPO/TAP] button to set the tempo in the same way.
This parameter is not available when MIDI Sync is set to MIDI and the instrument is set to
synchronize to an external device.
NOTE
When MIDI Sync is set to A/D In, the tempo search starts at the first tapping action.
MIDI Sync
Sets the parameters related to synchronization to the connected external device.
Select Internal for using the internal clock of this instrument, MIDI for using the external MIDI
clock of the DAW software on the computer or the external MIDI device, or A/D In (ABS) for
using the audio signal input from the A/D INPUT jacks, for playing back the Arpeggios, Motion
Sequencer, and Songs.
Settings: Internal, MIDI, A/D In (ABS)
Internal: Synchronizes to the internal clock. For using this instrument by itself or as
the primary clock source for other devices.
MIDI: Synchronizes to the MIDI clock received from the external MIDI device. For
using the external device as the primary clock source.
A/D In: Synchronizes to the tempo of the audio signal input from the A/D INPUT
jacks.
Clock Out (MIDI Clock Out)
Sets the MIDI clock messages to be transmitted.
Settings: Off, On
Mode (Click Mode)
Sets when to play back the click sound (metronome).
Settings: Off, Rec, Rec/Play, Always
Off: No click sound is played.
Rec: The click sound is played during Song or Pattern recording.
Rec/Play: The click sound is played during Song or Pattern recording and playback.
Always: The click sound is always played.
Precount (Click Precount)
484