Yamaha MONTAGE M6 Operation Manual page 465

Sets the output gain of the channels 1–30 of the [USB TO HOST] terminal.
Settings: −6dB, +0dB, +6dB, +12dB
Direct Monitor
Sets the audio signal output from Main L&R (USB Out) and USB 1–30 channels to the external
device (such as a computer) to be also played back from this instrument (direct monitoring).
When this is set to on, the audio signal output to the Main L&R (USB Out) channel and USB 1–
30 channels is also sent to the OUTPUT (BALANCED) jacks and [PHONES] jack of this
instrument.
When there is no USB connection, the Direct Monitor switch is automatically turned on.
Settings: Off, On
Monitor Volume
Shows the Monitor Volume screen.
MIDI I/O
On the MIDI I/O screen, you can set the MIDI input and output.
Operation
[UTILITY] → Settings → MIDI I/O
MIDI Signal Flow
Displays the current MIDI signal flow diagram.
The flow diagram changes depending on the settings of the instrument.
By tapping near the Local Control switch on the MIDI Signal Flow, you can turn Local Control on
or off.
465