Yamaha MONTAGE M6 Operation Manual page 297

MW (Modulation Wheel)
Sets the transmission and reception of MIDI Modulation wheel messages on or off.
This parameter is not available when CC (Control Change) is set to Off.
Settings: Off, On
Sustain
Sets the transmission and reception of MIDI Sustain and Sostenuto messages on or off.
This parameter is not available when CC (Control Change) is set to Off.
Settings: Off, On
FC1 (Foot Controller 1)
FC2 (Foot Controller 2)
Sets the transmission and reception of MIDI messages for the separately sold foot controllers
on or off.
This parameter is not available when CC (Control Change) is set to Off.
Settings: Off, On
FS (Foot Switch)
Sets the transmission and reception of MIDI messages for the separately sold foot switch on or
off.
This parameter is not available when CC (Control Change) is set to Off.
Settings: Off, On
A. Sw 1 (Assignable Function Switch 1)
A. Sw 2 (Assignable Function Switch 2)
Sets the transmission and reception of MIDI messages for the [ASSIGN 1] and [ASSIGN 2]
buttons on or off.
This parameter is not available when CC (Control Change) is set to Off.
Settings: Off, On
MS Trigger (Motion Sequencer Trigger)
Sets the transmission and reception of MIDI messages for the [MSEQ TRIGGER] button on or
off.
This parameter is not available when CC (Control Change) is set to Off.
Settings: Off, On
RB (Ribbon Controller)
Sets the transmission and reception of MIDI Ribbon Controller messages on or off.
This parameter is not available when CC (Control Change) is set to Off.
Settings: Off, On
297