Yamaha MONTAGE M6 Operation Manual page 142

Sets the cutoff frequency for each Part.
Settings: −64–+63
Res (Filter Resonance/Width)
Sets the filter resonance or filter width for each Part.
Settings: −64–+63
FEG Depth
Sets the FEG depth for each Part.
Settings: −64–+63
When Offset is set to Off
By setting Offset to Off, some Scene parameters can be finely-adjusted.
Cutoff
Settings: (FM-X, AN-X): 0–1023
Resonance
Settings: (FM-X): 0–127
Settings: (AN-X): 0–255
FEG
Settings: (AN-X): −9600–+9600
NOTE
It is recommended to set Offset to On when you wish to use both Smart Morph and Scene.
Mute (Part Mute)
Switches Mute for the Part on or off.
Settings: Off, On
Volume (Part Volume)
Sets the volume for the Part.
Settings: 0–127
Common view
Cutoff (Cutoff Frequency)
Sets the offset value for the cutoff frequency of the Part.
Settings: −64–+63
142