Yamaha MONTAGE M6 Operation Manual page 121

1–3 (Oscillator 1–3)
Opens the OSC/Tune screen for Part Edit (AN-X).
N (Noise)
Opens the Noise screen for Part Edit (AN-X).
Filter 1, 2
Opens the Filter Type screen for Part Edit (AN-X).
Amplifier
Opens the Amp EG screen for Part Edit (AN-X).
Smart Morph
Shown when the View Mode is set to Smart Morph.
The map will not be shown when there is no Smart Morph information.
Motion Seq
Shown when the View Mode is set to Motion Seq.
Shows the lane set in the View Lane of the current Part.
121