Yamaha MONTAGE M6 Operation Manual page 285

Sets the speed and the timing of the playback of the Motion Sequence set for the Destination in
the Control Assign screen.
Settings: Off, Tempo, Beat, Arp, Lane1 (when Lanes 2–4 are selected)
Off: Plays back the Lane Motion Sequencer alone.
Tempo: Plays back the Lane Motion Sequencer at the Performance tempo.
Beat: Plays back in sync with the beat.
Arp: Plays back the Lane Motion Sequencer in sync with the top of the Arpeggio
playback.
Lane1: Plays back the Lane Motion Sequencer in sync with Lane 1.
When Sync is set to Off
Speed (Lane Speed)
Sets the playback speed for the Motion Sequence.
This parameter is available when Lane Motion Sequencer is set to Off.
Settings: 0–127
Delay Time (Lane Key On Delay Time Length)
Sets the delay time for starting the playback of the Motion Sequence when Sync is set to Off.
Settings: 0–127
Fade In Time (Lane Fade In Time Length)
Sets the time to reach the maximum amplitude for the Motion Sequence when Sync is set to
Off.
Settings: 0–127
When Sync is set to something other than Off
Unit Multiply (Lane Unit Multiply)
Sets the percentage for stretching or compressing the Motion Sequencer playback time for
the current Lane.
This parameter is available when Lane Motion Sequencer is set to Off or something other
than Lane 1.
Settings: 50%–6400%, Common, Arp
200%: The playback time is doubled, and the tempo is halved as a result.
100%: The playback time is kept unchanged.
50%: The time length is halved, and the tempo is doubled as a result.
Common: The value set in the Unit Multiply common to all Parts is applied.
Arp: The value set in the Unit Multiply of the Part Arpeggio is applied.
Lane Key On Delay (Lane Key On Delay Time Length)
285