Yamaha MONTAGE M6 Operation Manual page 23

(1) Main category for each Part
(2) Switching views for Solo, Mute, and Keyboard Control
(3) Switching between 3-band EQ and 2-band EQ views
(4) EQ for each Part
(5) Parameters for each Part
(6) Switching to 16-part view
(7) Audio part view (16-part view not shown)
With the Audio part, you can set the parameters for the audio input from the A/D INPUT jacks
and the [USB TO HOST] terminal (Digital* Part).
* Refers to the audio set to Digital L/R in audio channels.
2
Select a parameter by using the PART buttons or cursor buttons on the
top panel, or tap the icons and buttons on the screen.
3
Change the value by using the Data dial or relevant Display knob.
If you need to fine-adjust the value, press the [EDIT/
is shown on the display to open the Edit screen.
Using Scenes
The Scene is a "snapshot" of various settings, such as Arpeggio type, Motion sequence type,
and Part parameters. By registering different Scenes to each of the eight SCENE buttons, you
can use the SCENE buttons to recall different settings instantly.
This would be convenient, for example, when you wish to change only the Arpeggio and Motion
] button while the Mixing screen
23