Yamaha MONTAGE M6 Operation Manual page 353

Sets the level of the drum key signals sent to Insertion Effect A or Insertion Effect B to the
Reverb or Variation Effect.
This parameter can be set for each Drum Key.
This parameter is available when Connect (Drum Key Connection Switch) is set to Thru, and
either when Part Output is set to Main, or when Part Output is set to Drum and Drum Key Out is
set to MainL&R.
Settings: 0–127
Drum Key Out (Drum Key Output Select)
Sets the output destination for each Drum Key.
This parameter is shown only when Part Output is set to Drum.
Settings: MainL&R, AsgnL&R, USB1&2–USB29&30, AsgnL, AsgnR, USB1–30
MainL&R: Outputs in stereo (two channels) to the OUTPUT [L/MONO] and OUTPUT
[R] jacks.
AsgnL&R: Outputs in stereo (two channels) to the ASSIGNABLE OUTPUT [L] and
ASSIGNABLE OUTPUT [R] jacks.
USB1&2–USB29&30: Outputs in stereo (channels 1 and 2, to channels 29 and 30) to
the [USB TO HOST] terminal.
AsgnL: Outputs in mono (one channel) to the ASSIGNABLE OUTPUT [L] jack.
AsgnR: Outputs in mono (one channel) to the ASSIGNABLE OUTPUT [R] jack.
USB1–30: Outputs in mono (channels 1 to 30) to the [USB TO HOST] terminal.
NOTE
When Connect (Drum Key Connection Switch) is set to InsA or InsB, and this parameter is fixed to the
MainL&R setting.
Ins A
Ins B
The screen here is the same as the one opened from Effect → InsA or InsB on the Part Edit
(AWM2).
3-band EQ
The screen here is the same as the one opened from Effect → 3-band EQ on the Part Edit
(AWM2).
353