Yamaha MONTAGE M6 Operation Manual page 226

Settings: 0.1–12.0
Output Level (A/D Part 2-band EQ Output Level)
Sets the output gain of the 2-band EQ.
Settings: −12.0dB–+12.0dB
Arp/MS
Arp Common
On the Arp Common screen, you can set the Arpeggio parameters for the entire Performance.
Operation
[PERFORMANCE] → Common selection → [EDIT/
Arp Master (Arpeggio Master Switch)
Sets the Arpeggio for the Performance on or off.
This switch is linked to the [ARP ON/OFF] button on the top panel.
Settings: Off, On
Sync Quantize (Arpeggio Sync Quantize Value)
Adjusts the timing for starting the next Arpeggio phrase while the first Arpeggio is being played
back, when playing back Arpeggio phrases in multiple Parts. When set to Off, the Arpeggio is
played back when the Part is played on the keyboard.
Settings: Off, 60 (thirty-second note), 80 (sixteenth note triplet), 120 (sixteenth note), 160
(eighth note triplet), 240 (eighth note), 320 (quarter note triplet), 480 (quarter note)
(Numbers indicated here are clock values.)
] → Arp/MS → Arp Common
226