Yamaha Montage 7 Reference Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Synthesizer
  5. Montage 7
  6. Reference manual

Yamaha Montage 7 Reference Manual

Hide thumbs Also See for Montage 7:
Table of Contents

Advertisement

Quick Links

Contents
Using The Montage Manuals ..................................2
Functional Blocks ......................................................3
Tone Generator Block................................................4
Tone Generator block ...................................................... 4
A/D Input Block ........................................................10
Sequencer Block ......................................................10
Arpeggio Block.........................................................11
Arpeggio Categories....................................................... 11
Sub Categories............................................................... 11
Arpeggio Type Name..................................................... 12
Arpeggio-Related Settings............................................... 13
Arpeggio Playback Types................................................ 15
Motion Sequencer Block .........................................16
Effect Block ..............................................................18
Effect Structure............................................................... 18
Effect Connection ........................................................... 19
About The Vocoder Effect............................................... 19
Envelope Follower Block.........................................20
Controller Block .......................................................21
Keyboard ....................................................................... 21
Pitch Bend Wheel ........................................................... 21
Modulation Wheel........................................................... 21
Ribbon Controller........................................................... 21
Assignable Switches...................................................... 21
Knobs/Control Sliders .................................................... 22
Super Knob.................................................................... 22
Internal Memory .......................................................22
MUSIC SYNTHESIZER
Reference Manual
Reference
3
Display (Touch Panel) Configuration ...................... 24
Performance Play (Home)....................................... 26
Motion Control......................................................... 28
Mixing ....................................................................... 44
Scene........................................................................ 49
Play/Rec ................................................................... 54
Normal Part (Awm2) Edit........................................ 58
Element Common Edit (Common) .................................58
Element Edit (Element) ..................................................94
Element All (All Element) .............................................117
Drum Part Edit ....................................................... 119
Key Common Edit (Common) ......................................119
Key Edit (Key) ..............................................................126
Normal Part (Fm-X) Edit ........................................ 131
Operator Common Edit (Common) ..............................131
Operator Edit (Operator) ..............................................141
Category Search.................................................... 161
Performance Category Search.....................................161
Utility ...................................................................... 165
Live Set................................................................... 183
Live Set ........................................................................183
Live Set Edit (Edit) .......................................................184
Live Set Register (Register) .........................................186
Connecting An Iphone Or Ipad ............................. 187
24
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Montage 7 and is the answer not in the manual?

Questions and answers

Related Manuals for Yamaha Montage 7

Summary of Contents for Yamaha Montage 7

  • Page 1 MUSIC SYNTHESIZER Reference Manual Contents Reference Using the MONTAGE Manuals ........2 Basic Structure Display (touch panel) configuration ...... 24 Performance Play (Home)........26 Functional Blocks ............3 Motion Control............28 Tone Generator Block..........4 Mixing ............... 44 Tone Generator block ............4 Scene................

  • Page 2: Using The Montage Manuals

    Explains the Part parameters, effect types, effect parameters, and MIDI messages that are used for synthesizers incorporating the Yamaha AWM2 and FM-X tone generators. Read the Owner’s Manual and Reference Manual first and then use this parameter manual, if necessary, to learn more about parameters and terms that relate to Yamaha synthesizers.

  • Page 3: Functional Blocks

    This instrument is equipped with an AWM2 tone generator block. AWM2 (Advanced Wave Memory 2) is a synthesis system based on sampled waves (sound material), and is used in many Yamaha synthesizers. For extra realism, each AWM2 Voice uses multiple samples of a real instrument’s waveform.

  • Page 4: Tone Generator Block

    Basic Structure FM-X Functional blocks This synthesizer also features an FM-X tone generator, in addition to the AWM2 block. The Tone Generator block abbreviation “FM” of FM-X stands for “frequency modulation,” which is a special tone generation A/D Input block system that uses the frequency of one waveform to modulate another waveform, in order to produce a completely new one.
  • Page 5 Basic Structure Normal Parts (AWM2), Normal Parts (FM-X), and Drum Parts Functional blocks Normal Parts (AWM2) Tone Generator block These Parts are played conventionally from the A/D Input block keyboard, with standard pitches sounding for each key, Element 2 Element 4 Element 6 Sequencer block Velocity...

  • Page 6: Expanded Articulation

    Basic Structure Expanded Articulation (XA) Functional blocks Tone Generator block Expanded Articulation (XA) is a tone generation system that provides greater performance flexibility and acoustic realism. This feature allows you to more effectively recreate realistic sound and natural A/D Input block performance techniques—such as legato and staccato—and provides other unique modes for random Sequencer block and alternate sound changes as you play.
  • Page 7 Normal Part (AWM) Edit Drum Part Edit Normal Part (FM-X) Edit Common/Audio Edit Category Search Utility Live Set iPhone/iPad connection Multi-dimensional sonic change Tone generator Effect For details on the Motion Control, refer to the website below: http://www.yamaha.com/montage/ MONTAGE Reference Manual...
  • Page 8 Basic Structure Elements, Drum Keys and Operators Functional blocks Tone Generator block Elements/Drum Keys/Operators are the smallest “building blocks” in the MONTAGE that comprise a Part. A/D Input block These small sound units can be built, enhanced and processed by a variety of traditional synthesizer parameters, such as Pitch EG, Filter EG, Amplitude EG, and LFO (shown below).
  • Page 9 Basic Structure Amplitude This unit controls the output level (amplitude) of the Element/Drum Key/Operator. Functional blocks Parameters related to Amplitude and Amplitude EG can be set as follows. Tone Generator block • For Normal Parts (AWM2) A/D Input block [EDIT]  Part selection  Element selection  [Amplitude] (page 108) Sequencer block...

  • Page 10: A/D Input Block

    Basic Structure A/D Input Block Functional blocks This block handles the audio signal input from the A/D INPUT [L/MONO]/[R] jacks. Various parameters Tone Generator block such as volume, pan, and effect can be set for the audio signal and the sound is output together with other Parts.

  • Page 11: Arpeggio Block

    This block lets you automatically trigger musical and rhythmic phrases by simply pressing a note or notes Tone Generator block on the keyboard. Yamaha’s Arpeggio sequence also changes in response to the actual notes or chords you play, giving you a wide variety of inspiring musical phrases and ideas—both in composing and A/D Input block performing.

  • Page 12: Arpeggio Type Name

    Basic Structure Arpeggio Type Name Functional blocks The Arpeggio Types are named according to certain rules and abbreviations. Once you understand these Tone Generator block rules and abbreviations, you’ll find it easy to browse through and select the desired Arpeggio Types. A/D Input block Arpeggio types with “_N”...

  • Page 13: Arpeggio-Related Settings

    Basic Structure 5 Time Signature Indicates the time signature or meter of the Arpeggio type. Functional blocks Tone Generator block 6 Length A/D Input block Indicates the data length (amount of measures) of the Arpeggio type. When the Loop parameter set to “off,”...
  • Page 14 Basic Structure Using the Knobs to control Arpeggios Functional blocks Tone Generator block By pressing the Knob function [ARP/MS] button, you can use the Knobs 1 – 4 to control Arpeggio playback. Try this out and listen for the changes in the sound. For details regarding the effect of the Knobs A/D Input block 1 –...

  • Page 15: Arpeggio Playback Types

    Basic Structure Arpeggio playback types Functional blocks There are three main Arpeggio playback types as described below. Tone Generator block A/D Input block Sequencer block Arpeggios for Normal Parts Arpeggio block Arpeggio types (belonging to all categories except for Drum/Perc and a part of Control/HybridSeq) Motion Sequencer block created for use of Normal Parts have the following three playback types.

  • Page 16: Arpeggios Containing Mainly Non-Note Events

    Basic Structure Arpeggios containing mainly non-note events Functional blocks Tone Generator block Arpeggio types (in Control/HybridSeq main categories with Filter, Expression, Pan, Modulation, Pitch Bend, and Assign 1/2 sub categories) are programmed primarily with Control Change and Pitch Bend data. They A/D Input block are used to change the tone or pitch of the sound, rather than play specific notes.
  • Page 17 Basic Structure Turning the Motion Sequencer on/off Functional blocks Tone Generator block The following settings are available for turning the Motion Sequencer playback on/off. A/D Input block To play the Motion Sequence when the note is Set the “LaneSW” parameter to “On,” the “Trigger” Sequencer block pressed: parameter to “Off,”...

  • Page 18: Effect Block

    Basic Structure Effect Block Functional blocks This block applies effects to the output of the tone generator block as well as audio input block, Tone Generator block processing and enhancing the sound. Effects are applied in the final stages of editing, letting you change the sound as desired.

  • Page 19: Effect Connection

    Basic Structure Effect connection Functional blocks 1 Each EQ and Insertion Effect applied to each Performance Tone Generator block Part Part EQ A/D Input block Part Insertion A/B 2 Variation and Reverb related parameters Sequencer block Setting: Part Edit  [Effect]  [Routing] (page page 122,...

  • Page 20: Envelope Follower Block

    Basic Structure Envelope Follower Block Functional blocks Envelope Follower is a function for detecting the envelope of the input signal waveform and modifying Tone Generator block sounds dynamically. This function allows you to control not only Part outputs but also input signals from external devices connected to the A/D INPUT [L/MONO]/[R] jacks.

  • Page 21: Controller Block

    Basic Structure Controller Block Functional blocks This block consists of the keyboard, Pitch Bend and Modulation Wheels, Ribbon Controller, Knobs, Sliders Tone Generator block and so on. The keyboard itself doesn’t generate sounds, but instead generates/transmits note on/off, velocity and other information (MIDI messages) to the synthesizer’s tone generator block when you play A/D Input block notes.

  • Page 22: Knobs/Control Sliders

    Basic Structure Knobs/Control Sliders Functional blocks These knobs and sliders let you change various aspects of the Part’s sound in real time—while you play. Tone Generator block For instructions on using the knobs/sliders, see the Owner’s Manual. For instructions on using the Knobs 1 A/D Input block –...
  • Page 23 Basic Structure Edit buffer The edit buffer is the memory location for edited data of these types: Performance, Live Set, and Song. Functional blocks Although the edit buffer is designed specifically for data writing and data reading, the data contained in Tone Generator block the edit buffer is lost when the power is turned off.

  • Page 24: Reference

    Reference Performance Edit Search Utility Live Set Display (touch panel) Reference Display (touch panel) configuration This section explains the navigation bar which is common to all types of displays. Navigation bar 1 HOME icon Moves to the Performance Play display (page 26).
  • Page 25 Reference Performance Edit Search Utility Live Set Display (touch panel) Display All Scroll buttons Display All button 9 Pop-up List Displays setting values for parameters. When the setting values are displayed in multiple pages, you will need to use the Scroll buttons to scroll through the pages or the Display All button to display all of the setting values.

  • Page 26: Performance Play (Home)

    Reference Performance Edit Search Utility Live Set Performance Performance Play (Home) Home From the Performance Play display you can play a selected Performance and edit some of the Motion Control Performance-related settings. Overview Quick Edit Home Arpeggio Motion Seq Press the [PERFORMANCE] button, or Operation Touch the [HOME] icon Super Knob...
  • Page 27 Reference Performance Edit Search Utility Live Set Performance 5 Part names Indicates the Part names. Touching the parameter calls up the menu for Category Search, Edit, and Home Copy. To add another Part, touch “+” icon. Motion Control 6 Common Motion Sequencer switch Overview Determines whether the Motion Sequencer of the Common/AD Parts is on or off.

  • Page 28: Motion Control

    Reference Performance Edit Search Utility Live Set Performance Motion Control Home From the Motion Control display you can edit all Motion Control settings, such as general sound settings, Motion Control Arpeggio, and the Motion Sequencer of the currently selected Performance. Overview The Motion Control section contains the following various displays.
  • Page 29 Reference Performance Edit Search Utility Live Set Performance Controller Determines whether or not the illustration of the connection between “Controller” and Part is shown. Home The “Controller” here refers to: Motion Control • Pitch Bend wheel Overview • Modulation wheel Quick Edit •...
  • Page 30 Reference Performance Edit Search Utility Live Set Performance Part Indicates the currently selected Part. Select the Part you want to use Quick Edit with here. Home Settings: Common, Part 1 – 16 Motion Control  When “Part” is set to “Common” Overview You can edit the parameters commonly applied to all Parts.
  • Page 31 Reference Performance Edit Search Utility Live Set Performance Decay (AEG Decay Time) Determines how fast the volume falls from maximum attack level to the sustain level. This parameter Home determines the offset value of the AEG (page 110, page 129, page 143).
  • Page 32 Reference Performance Edit Search Utility Live Set Performance Common Clock Unit (Common Unit Multiply) Adjusts the Arpeggio/Motion Sequencer playback time for the entire Performance. Home This parameter is applied to the Part when the Unit Multiply parameter for Arpeggio/Motion Sequencer Motion Control of the Part is set to “Common.”...
  • Page 33 Reference Performance Edit Search Utility Live Set  When “Part” is set to Part 1 – 16 Performance You can edit the parameters for the selected Part. Home Motion Control Overview Quick Edit Arpeggio Motion Seq Super Knob Knob Auto Mixing Scene Play / Rec...
  • Page 34 Reference Performance Edit Search Utility Live Set Performance Edit Part MS (Edit Part Motion Sequencer) Calls up the Motion Sequencer Lane display (page 81) for Part Edit. Home Motion Control EQ Low Gain (3 band EQ Low Gain) Determines the level gain for the Low band. Overview Settings: -12dB –...
  • Page 35 Reference Performance Edit Search Utility Live Set Performance Part Motion Seq Amplitude (Part Motion Sequencer Amplitude) Determines the Amplitude (page 83) of the Motion Sequencer for the selected Part. Home This is the offset value for the Lane Motion Seq Amplitude when “MS FX” is set to on for the Lane. Motion Control Settings: -64 –...
  • Page 36 Reference Performance Edit Search Utility Live Set Performance Sync Quantize (Sync Quantize Value) Determines the actual timing at which the next Arpeggio playback starts when you trigger it while the Home Arpeggio of multiple Parts is playing back. When set to “off,” the next Arpeggio starts as soon as you Motion Control trigger it.
  • Page 37 Reference Performance Edit Search Utility Live Set  When “View” is set to “Range” Performance Home Motion Control Overview Quick Edit Arpeggio Motion Seq Super Knob Knob Auto Mixing Scene Play / Rec MIDI Audio Name (Arpeggio Name) Settings: See the Data List PDF document. Velocity Limit (Arpeggio Velocity Limit) Determines the lowest and highest velocity which can trigger Arpeggio playback.
  • Page 38 Reference Performance Edit Search Utility Live Set Performance Motion Seq (Motion Sequencer) Home Motion Control From the Motion Sequencer display you can set parameters related to Motion Sequencer for multiple Parts. Overview [PERFORMANCE]  [Motion Control]  [Motion Seq] Operation Quick Edit Arpeggio Motion Seq...
  • Page 39 Reference Performance Edit Search Utility Live Set Performance Super Knob Home Motion Control From the Super Knob display you can set parameters controlled by the Super knob. Overview [PERFORMANCE]  [Motion Control]  [Super Knob] Operation Quick Edit Arpeggio Assignable Knob 1 – 8 Destination Value 1 Motion Seq Super Knob Knob Auto...
  • Page 40 Reference Performance Edit Search Utility Live Set Performance Knob Auto Home Motion Control From the Knob Auto display you can set parameters related to Motion Sequencer applied to the Super Knob (Super Knob Motion Sequencer.) The parameter value of the Super Knob can be automatically Overview controlled by the Motion Sequencer.
  • Page 41 Reference Performance Edit Search Utility Live Set Performance Arp/MS Grid (Arpeggio/Motion Sequencer Grid) Determines the type of note that serves as the basis for the Quantize or Swing. The parameter value is Home displayed in clocks. Motion Control For the Motion Sequencer, this parameter value is one step length. This setting is applied to the Part which is selected as the Sync Part (above).
  • Page 42 Reference Performance Edit Search Utility Live Set Performance Edit Sequence Calls up the Motion Sequence Setting display. You can create a custom Sequence consisting of up to Home sixteen steps. Motion Control Motion Seq Step Value Overview Quick Edit Arpeggio Motion Seq Super Knob Knob Auto...
  • Page 43 Reference Performance Edit Search Utility Live Set Performance Pulse A / Pulse B (Super Knob Motion Sequencer Step Curve Type) Determines the Curve Type of the parameter for each of “Pulse A” and “Pulse B.” “Motion Seq Step Type” Home described above determines which curve set here is used for each step.

  • Page 44: Mixing

    Reference Performance Edit Search Utility Live Set Performance Mixing Home From the Mixing display you can adjust the volume and effect settings for each Part. Motion Control Overview The settings in the Mixing display are stored as part of Performance data. Quick Edit Mixing Arpeggio...
  • Page 45 Reference Performance Edit Search Utility Live Set  When one of Parts 1 – 16 is selected Performance Determines the Mixing setting for each Part 1 –16. Home Function Switch Part Category Motion Control Overview Quick Edit Arpeggio Motion Seq Super Knob Knob Auto Mixing...
  • Page 46 Reference Performance Edit Search Utility Live Set Performance • When “Kbd Ctrl” is selected Home Motion Control Overview Quick Edit Arpeggio Motion Seq Super Knob Knob Auto Mixing Scene Play / Rec MIDI Audio Kbd Ctrl (Keyboard Control) Turns the Keyboard Control function on/off for the selected Part 1 – 8. When the function is on, this button lights.
  • Page 47 Reference Performance Edit Search Utility Live Set Performance Var Send (Variation Send) Adjusts the Variation send level of the selected Part 1 – 16. Home Settings: 0 – 127 Motion Control Dry Level Overview Determines the level of the unprocessed (dry) sound of the selected Part 1 – 16. Quick Edit Settings: 0 –...
  • Page 48 Reference Performance Edit Search Utility Live Set Performance A/D Part Pan (Audio Part Pan) Digital Part Pan Home Determines the stereo pan position of the Audio Part/Digital Part. Motion Control Settings: L63 – C – R63 Overview A/D Volume (Audio Part Volume) Quick Edit Digital Part Volume Arpeggio...

  • Page 49: Scene

    Reference Performance Edit Search Utility Live Set Performance Scene Home You can store all parameter settings such as Arpeggio type, Motion Sequencer type, and the Part Motion Control parameter values together as a “Scene.” There are eight Scenes and you can select them by pressing the Overview [SCENE] button.
  • Page 50 Reference Performance Edit Search Utility Live Set Performance Arp Select (Arpeggio Select) Determines the Arpeggio type for the selected Scene. Home Settings: 1 – 8 Motion Control  When the “Super Knob” tab is selected and the corresponding Memorize Switch is set Overview to ON Quick Edit...
  • Page 51 Reference Performance Edit Search Utility Live Set Performance Dry Level Determines the level of the unprocessed (dry) sound for each Part in the selected Scene. Home Settings: 0 – 127 Motion Control Overview Determines the stereo pan position for each Part in the selected Scene. Quick Edit Settings: L63 –...
  • Page 52 Reference Performance Edit Search Utility Live Set  When the “AEG” tab is selected and the corresponding Memorize Switch is set to ON Performance Home Motion Control Overview Quick Edit Arpeggio Motion Seq Super Knob Knob Auto Mixing Scene Play / Rec MIDI Audio Attack (AEG Attack Time)
  • Page 53 Reference Performance Edit Search Utility Live Set Performance Swing Determines the Swing setting of Arpeggio and Motion Sequencer for each Part in the selected Scene. Home For details about Swing, see “Quick Edit” (page 34). Motion Control Settings: -120 – +120 Overview Unit (Part Unit Multiply) Quick Edit...

  • Page 54: Play/Rec

    Reference Performance Edit Search Utility Live Set Performance Play/Rec Home You can playback/record MIDI data as Songs on this instrument itself or playback/record your Motion Control performance (audio data) on a USB flash memory device. Overview Quick Edit Play/Rec Arpeggio Motion Seq Super Knob MIDI...
  • Page 55 Reference Performance Edit Search Utility Live Set Performance Store Tempo Changes the Song tempo to the currently selected Tempo. Home This parameter is not available during: Motion Control • New recording (No previously recorded Song data.) Overview • Playback Quick Edit •...
  • Page 56 Reference Performance Edit Search Utility Live Set Performance Record Type Determines the Recording Type. This parameter is not available for the first recording. Home Settings: Replace, Overdub, Punch Motion Control Replace: You can use this method when you want to overwrite an already recorded Track with new data in real time. Overview The original data will be erased.
  • Page 57 Reference Performance Edit Search Utility Live Set Performance Position (Audio Position) Determines the starting position of Playback. The indicator also shows the current position during Home playback. Motion Control Audio Volume Overview Determines the volume of the Audio Playback. This parameter cannot be changed during recording. Quick Edit Settings: 0 –...

  • Page 58: Normal Part (Awm2) Edit

    Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Normal Part (AWM2) Edit Common A Normal Part (AWM2) (having pitched musical instrument sounds) can consist of up to eight Elements. Part Settings An Element is the basic, smallest unit for a Part.
  • Page 59 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Dry Level Determines the dry sound level (without effect processing) of the selected Part. This is available only when Common “Part Output”...

  • Page 60: Pitch

    Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Velocity Depth (Velocity Sensitivity Depth) When Offset (below) is set to 64: Determines the degree to which the resulting volume of the Depth=127 Depth=64 Common...
  • Page 61 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Portamento Part SW (Portamento Part Switch) Determines whether Portamento is applied to the selected Part or not. Common Settings: Off, On Part Settings Portamento Mode General...
  • Page 62 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Edit User Tuning Calls up the User Micro Tuning Setting display. Common Part Settings General Pitch Zone Settings Zone Transmit Effect Routing Ins A...
  • Page 63 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Zone Settings Common From the Zone Setting display you can set Zone-related parameters. Part Settings You can divide the keyboard into a maximum of eight independent areas (called “Zones”). To each Zone General can be assigned different MIDI channels.
  • Page 64 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Bank Select (Transmit Bank Select) Determines whether Bank Select MSB/LSB messages are transmitted to the external tone generator or not. Common This is not available when the Transmit Channel is set to off.
  • Page 65 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Zone Transmit Common From the Zone Transmit display you can set how each individual zone affects transmission of various MIDI Part Settings data, such as Control Change and Program Change messages.
  • Page 66 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Pan (Transmit Pan) Determines whether Pan messages are transmitted to the external tone generator or not. Common This is not available when the Transmit Control Change is set to off. Part Settings Settings: Off, On...
  • Page 67 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Effect Common Part Settings Routing General Pitch From the Routing display you can determine the Effect connections for Parts. Zone Settings [PERFORMANCE] ...
  • Page 68 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Ins Connect (Insertion Connection Type) Determines the effect routing for Insertion Effects A and B. The setting changes are shown on the diagram Common in the display, giving you a clear picture of how the signal is routed.
  • Page 69 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Release (Envelope Follower Release) Determines the release time of the Envelope Follower. Common Settings: 10ms – 680ms Part Settings Input Level General Indicates the Input Level of the signal from the Input Source set in “Part.”...
  • Page 70 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Side Chain/Modulator (Side Chain/Modulator Part) The Side Chain/Modulator uses the output from one track to control an effect in a different track. You can Common specify the Effect type for activating the feature so that input signals for Parts other than the selected Part Part Settings...
  • Page 71 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio  When “3-band EQ” is selected Normal Part (AWM2) Edit From this display you can make 3-band EQ settings. Common Part Settings General Pitch Zone Settings Zone Transmit Effect...
  • Page 72 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio  When “2-band EQ” is selected Normal Part (AWM2) Edit From this display you can make 2-band EQ settings. Common Part Settings General Pitch Zone Settings Zone Transmit Effect...
  • Page 73 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit EQ 1 Q (2-band EQ1 Q)/EQ 2 Q (2-band EQ2 Q) Determines the EQ bandwidth for the frequency which is set in “EQ 1 Freq/EQ2 Freq.” This is available Common only when “EQ Type”...
  • Page 74 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Hold Determines whether the Arpeggio continues cycling after the keys are released. Common Settings: Sync-off, Off, On Part Settings Sync-off: Arpeggio playback continues to run silently, even when you release the keys.
  • Page 75 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Unit (Part Unit Multiply) Adjusts the Arpeggio playback time. By using this parameter, you can create a different Arpeggio from the Common original one.
  • Page 76 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Individual Common From the Individual display you can set parameters corresponding to Arpeggio Selects 1 – 8. Part Settings Touching the Arpeggio Type Setting calls up a menu. In the displayed menu, touch [Search] to call up the General Arpeggio Category Search display (page...
  • Page 77 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Advanced Common From the Advanced display you can set advanced parameters related to the Arpeggio function. Part Settings General [PERFORMANCE]  [EDIT]  Part selection  ELEMENT/OPERATOR [COMMON] [Arpeggio]  Operation Pitch [Advanced]...
  • Page 78 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Random SFX Key On Ctrl (Random SFX Key On Control) When this is set to “on,” the Random SFX sound is played at the velocity generated by the playing of each Common note.
  • Page 79 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Common Arp Gate Time (Common Arpeggio Gate Time) Determines the Gate Time Rate (length) of the Arpeggio for the entire Performance. This is the offset value Common for the Gate Time Rate of the Arpeggio for each Part.
  • Page 80 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Part Arp Velocity (Part Arpeggio Velocity Rate) Determines how much the velocity of Arpeggio playback is offset from the original value. This is the offset Common value for the Velocity Rate (page...
  • Page 81 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Lane Common From the Lane display you can set parameters for each Lane of the Motion Sequencer. Part Settings General [PERFORMANCE] ...
  • Page 82 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Sync (Lane Motion Sequencer Sync) Determines if the playback of the Motion Sequence applied to the Destination (set in the Control Assign Common display (page...
  • Page 83 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Edit Sequence Calls up the Motion Sequence setting display. You can create a custom Sequence consisting of up to Common sixteen steps.
  • Page 84 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Motion Seq Step Type (Lane Motion Sequencer Step Type) Determines each Step Type of the Motion Sequence. You can switch between the Step Types A and B for Common the Step 1 –...
  • Page 85 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Mod/Control (Modulation/Control) Common Part Settings Part LFO General Pitch From the Part LFO display you can set the LFO-related parameters for the Part. Zone Settings [PERFORMANCE] ...
  • Page 86 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio  When “Tempo Sync” is set to “OFF” Normal Part (AWM2) Edit Common Part Settings General Pitch Zone Settings Zone Transmit Effect Routing Ins A Ins B Arpeggio Common...
  • Page 87 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Delay (LFO Delay Time) Determines the delay time between the moment you press a key on the keyboard and the moment the LFO Common comes into effect.
  • Page 88 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Edit User LFO Calls up the User LFO Setting display. You can create a custom LFO wave consisting of up to sixteen Common steps.
  • Page 89 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Control Assign Common Part Settings From the Control Assign display you can make controller assign settings for the Part. You can change sounds as desired by setting the desired controller to “Source” and the desired parameter General to “Destination.”...
  • Page 90 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Source Determines the desired Controller for controlling the parameter set in “Destination.” Common Settings: PitchBend, Modwheel, AfterTouch, FootCtrl 1, FootCtrl 2, FootSwitch, Ribbon, Breath, AsgnKnob 1 – 8, AsgnSw 1, Part Settings AsgnSw 2, MS Lane 1 –...
  • Page 91 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Polarity (Curve Polarity) Determines the Curve Polarity of the Curve type set in “Curve Type.” Common Settings: Uni, Bi Part Settings Uni: Unipolar changes only in a positive direction or in a negative direction from a base parameter value according General...
  • Page 92 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Output Determines the Output level of the Curve. Common Settings: 0 – 127 Part Settings General Receive SW (Receive Switch) Pitch Zone Settings From the Receive Switch display you can set how each individual Part responds to various MIDI data, such...
  • Page 93 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Pan (Receive Pan) Determines whether Pan messages are received or not. Common This is not available when the Receive Control Change is set to Off. Part Settings Settings: Off, On...

  • Page 94: Element Edit (Element)

    Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Element Edit (Element) Common Part Settings Osc/Tune (Oscillator/Tune) General Pitch From the Oscillator/Tune display you can assign the waveform (or basic sound material) to each Element. Zone Settings You can set the note range for the Element (the range of notes on the keyboard over which the Element will sound) as well as the velocity response (the range of note velocities within which the Element will sound).
  • Page 95 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit A.SW1 On: When the [ASSIGN 1] button is turned On, the Element will sound. A.SW2 On: When the [ASSIGN 2] button is turned On, the Element will sound. Common A.SW Off: When both the [ASSIGN 1] and [ASSIGN 2] buttons are turned Off, the Element will sound.
  • Page 96 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Length (Key On Delay Note Length) Determines the timing of “Key On Delay” when “Key On Delay Tempo Sync” is set to on. Common Settings: 1/16, 1/8 Tri.
  • Page 97 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit • Part and Waveform You can play the Waveform by assigning it to a Part then playing the keyboard with that Part. You can Common assign the Waveform to an Element of the Part in the Element Edit for the Normal Part (AWM2) Edit Part Settings...
  • Page 98 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Volume Determines the output volume of the selected Key Bank. Common Settings: 0 – 255 Part Settings General Determines the stereo pan position of the selected Key Bank. Pitch Settings: L63 –...
  • Page 99 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Time/Key (PEG Time Key Follow Sensitivity) Determines the degree to which the notes (specifically, their position or octave range) affect the Pitch EG Common times.
  • Page 100 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Filter Common Part Settings Type General Pitch From the Type display you can make comprehensive settings for the Filter unit. The available parameters differ depending on which Filter type is selected here.
  • Page 101 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Gain Frequencies that are “passed” by the filter Common Resonance Part Settings General Pitch Frequency Zone Settings Cutoff Frequency Zone Transmit Effect LPF12+HPF12: A combination of a -12 dB/oct Low-Pass Filter and a -12 dB/oct High-Pass Filter connected in serial.
  • Page 102 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Frequencies that are “passed” by the filter Common Gain Part Settings General Pitch Zone Settings Frequency Zone Transmit Center Frequency Effect BEF12: -12 dB/oct Band-Eliminate Filter.
  • Page 103 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Resonance Width Common This parameter’s function varies according to the selected Filter Type. If the selected filter is an LPF, HPF, Part Settings BPF (excluding BPFw), or BEF, this parameter is used to set the Resonance.
  • Page 104 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio  In case of the Filter Type with “HPF Cutoff” and “HPF Cutoff/Key” parameters Normal Part (AWM2) Edit Common Part Settings General Pitch Zone Settings Zone Transmit Effect Routing...
  • Page 105 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Filter EG Common From the Filter EG display you can make all time and level settings for the Filter EG, which determine how Part Settings the sound changes over time for Elements.
  • Page 106 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Time/Vel (FEG Time Velocity Sensitivity) Segment (FEG Time Velocity Sensitivity Segment) Common Determines how the FEG transition time (speed) responds to Velocity, or the strength with which the key is Part Settings pressed.
  • Page 107 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Scale (Filter Scale) Common From the Filter Scale display you can set parameters related to Filter Scale for Elements. Part Settings “Filter Scale”...
  • Page 108 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Amplitude Common Part Settings Level/Pan General Pitch From the Level/Pan display you can make Level and Pan settings for each individual Element. Zone Settings [PERFORMANCE] ...
  • Page 109 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Settings: Curve: 0 – 4 Common Part Settings General Pitch Pan (Element Pan) Zone Settings Determines the stereo Pan position for the selected Element. Zone Transmit Settings: L63 –...
  • Page 110 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Amp EG (Amplitude EG) Common From the Amplitude EG display you can make all the time and level settings for the Amplitude EG, which Part Settings determine how the volume of the sound changes over time.
  • Page 111 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Time/Vel (AEG Time Velocity Sensitivity) Segment (AEG Time Velocity Sensitivity Segment) Common Determines how the AEG transition time (speed) responds to Velocity, or the strength with which the key is Part Settings pressed.
  • Page 112 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Scale (Amplitude Scale) Common From the Amplitude Scale display you can make Amplitude Scale settings for each Element. Part Settings Amplitude Scale function controls the Amplitude output level according to the positions of the notes on the General keyboard.
  • Page 113 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Element LFO Common Part Settings From the Element LFO display you can make LFO related setting for each Element. The Low-Frequency Oscillator (LFO) unit of the Element generates a low frequency signal. The signal from General the LFO can be used to modulate the pitch, filter, and amplitude.
  • Page 114 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Pitch Mod (LFO Pitch Modulation Depth) Determines the amount (depth) by which the LFO waveform varies (modulates) the pitch of the sound. Common Settings: 0 –...
  • Page 115 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio  When “EQ Type” is set to “2-band” Normal Part (AWM2) Edit Common Low Freq Settings: 50.1Hz – 2.00kHz Part Settings Gain High Freq General Settings: 139.7Hz –...
  • Page 116 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio  When “EQ Type” is set to “P.EQ” Normal Part (AWM2) Edit Common Gain Part Settings Settings: 0.7 – 10.3 General Pitch Frequency Zone Settings Gain Zone Transmit –...

  • Page 117: Element All (All Element)

    Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Element All (All Element) Common Part Settings Osc (Oscillator) General Pitch From the Oscillator display you can set Oscillator-related parameters for the eight Elements. Zone Settings [PERFORMANCE] ...
  • Page 118 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (AWM2) Edit Velocity Limit Determines the minimum and maximum values of the velocity range within which each Element will Common respond. Each Element will only sound for notes played within its specified velocity range. If you first Part Settings specify the maximum value and then the minimum value, for example “93 to 34,”...

  • Page 119: Drum Part Edit

    Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Drum Part Edit Drum Part Edit Common Each Drum Part can consist of up to 73 Drum Keys, assigned to notes spread across the keyboard (C0 to Part Settings C6).
  • Page 120 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Drum Part Edit Var Send (Variation Send) Determines the level of the selected Part that is sent to the Variation effect. This is available only when “Part Common Output”...
  • Page 121 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Drum Part Edit Velocity Depth (Velocity Sensitivity Depth) Determines the degree to which the resulting volume of the tone generator responds to your playing Common strength.
  • Page 122 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Drum Part Edit Effect Common Part Settings Routing General Zone Settings [PERFORMANCE]  [EDIT]  Part selection  ELEMENT/OPERATOR [COMMON]  [Effect]  Zone Transmit Operation [Routing] Effect...
  • Page 123 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Drum Part Edit RevSend (Reverb Send) VarSend (Variation Send) Common Determines the Send level of the signal sent from Insertion Effect A/B (or the bypassed signal) to the Part Settings Reverb/Variation effect.
  • Page 124 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Drum Part Edit Common Part Settings General Zone Settings Zone Transmit Effect Routing Ins A Ins B Arpeggio Common Individual Advanced Motion Seq Common KeyRev (Drum Key Reverb Send) Lane KeyVar (Drum Key Variation Send)
  • Page 125 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Drum Part Edit Ins A (Insertion Effect A) Common Ins B (Insertion Effect B) Part Settings Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 69).

  • Page 126: Key Edit (Key)

    Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Drum Part Edit Key Edit (Key) Common Part Settings Osc/Tune (Oscillator/Tune) General Zone Settings From the Oscillator/Tune display you can set Oscillator-related parameters for each Key of the Drum Part. Zone Transmit [PERFORMANCE] ...
  • Page 127 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Drum Part Edit New Waveform Loads Audio data stored in the USB flash memory as “Waveform.” For details on loading, see “Load” Common (page 174).
  • Page 128 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Drum Part Edit Filter Common Part Settings From the Filter display you can apply filter settings to the Drum Part. These let you apply a low pass filter and high pass filter to each individual Drum key.
  • Page 129 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Drum Part Edit Level/Pan Common Part Settings From the Level/Pan display you can make Level and Pan settings for each Drum Key. General [PERFORMANCE]  [EDIT]  Part selection  Key selection  [Level/Pan] Operation Zone Settings Zone Transmit...
  • Page 130 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Drum Part Edit Alternate Pan Determines the amount by which the sound of the selected Drum key is panned alternately left and right Common for each note you press.

  • Page 131: Normal Part (Fm-X) Edit

    Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (FM-X) Edit Normal Part (FM-X) Edit Common A Normal Part (FM-X) can consist of up to eight Operators. There are two types of Normal Part (FM-X) Edit Part Settings displays: Operator Common Edit display, for editing settings common to all eight Operators;...
  • Page 132 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (FM-X) Edit KeyOnDly Sync (Key On Delay Tempo Sync Switch) Determines whether or not “Key On Delay Time Length” is synchronized to the tempo. Common Settings: Off, On...
  • Page 133 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (FM-X) Edit Algorithm Search Calls up the Algorithm Search display. From this display you can search for desired Algorithms by filtering Common the number of Carriers, or the maximum length of the serial connection of Operators.
  • Page 134 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (FM-X) Edit Pitch/Filter Common Part Settings Pitch General Algorithm Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 60), except that the Legato Slope parameter is not available.

  • Page 135: Filter Type

    Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (FM-X) Edit Pitch/Key (Pitch Key Follow Sensitivity) Determines the sensitivity of the Key Follow effect (the pitch interval of adjacent notes), assuming the pitch Common of the Center Key (below) as standard.
  • Page 136 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (FM-X) Edit Effect Common Part Settings Routing General Algorithm From the Routing display you can determine the Effect connections for Parts. Zone Settings [PERFORMANCE] ...
  • Page 137 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (FM-X) Edit Var Send (Variation Send) Determines the Send level of the signal sent from Insertion Effect A/B to the Variation effect. Common Settings: 0 –...
  • Page 138 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (FM-X) Edit Mod/Control (Modulation/Control) Common Part Settings Part LFO General Algorithm Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 85), except that the setting values of the Destination parameter differ and that “Element Phase Offset (LFO Element Phase...
  • Page 139 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (FM-X) Edit Pitch Modulation (2nd LFO Pitch Modulation Depth) Determines the amount (depth) by which the 2nd LFO waveform varies (modulates) the pitch of the sound. Common Settings: 0 –...
  • Page 140 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (FM-X) Edit Common Part Settings General Algorithm Zone Settings Zone Transmit Pitch / Filter Pitch PEG/Scale Filter Type Filter EG Filter Scale Effect Routing Ins A...

  • Page 141: Operator Edit (Operator)

    Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (FM-X) Edit Operator Edit (Operator) Common Form/Freq (Form/Frequency) Part Settings General From the Form/Frequency display you can make all the waveform and frequency settings for Operators. Algorithm Zone Settings [PERFORMANCE] ...
  • Page 142 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (FM-X) Edit Basic waveforms used as Operators contain harmonics, with the exception of “Sine.” A sine wave contains its fundamental frequency with no additional harmonics. Therefore, when “Form” is set to any waveform Common other than “Sine”, you can adjust harmonics and the peak of each formant, depending on the Waveform Part Settings...
  • Page 143 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (FM-X) Edit Coarse (Coarse Tune) Determines the pitch of each Operator. Common Settings: When “Freq Mode” is set to “Ratio”: 0 – 31 Part Settings When “Freq Mode”...
  • Page 144 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Normal Part (FM-X) Edit Level (Operator Level) Determines the output level of the Operator. Common Settings: 0 – 99 Part Settings Level/Vel (Level Velocity Sensitivity) General Determines how the output level of the Operator responds to Velocity.

  • Page 145: Common/Audio Edit (Common/Audio)

    Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Common/Audio Edit Common/Audio Edit (Common/Audio) Common/Audio A Performance consists up to 16 Parts. You can set the parameters related to the entire Performance and General the Audio Parts in the Common/Audio Edit display.
  • Page 146 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Common/Audio Edit Rev Return (Reverb Return) Determines the return level of the Reverb effect. Common/Audio Settings: 0 – 127 General Audition Phrase Number Audio In Determines the Audition Phrase Number.
  • Page 147 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Common/Audio Edit Audio In Common/Audio General Mixing Audio In Mixing From the Mixing display you can adjust the volume settings of the Audio Part (the input signal from the A/D INPUT [L/MONO]/[R] jacks) and the Digital Part (the input signal from the [USB TO HOST] terminal*).
  • Page 148 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Common/Audio Edit Rev Send (A/D Part Reverb Send/Digital Part Reverb Send) Determines the Send level of the Audio Part/Digital Part signal sent to the Reverb effect. This is available Common/Audio only when “Part Output”...
  • Page 149 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Common/Audio Edit Side Chain/Modulator (Side Chain/Modulator Part) Determines the Part used for the Side Chain/Modulator. Common/Audio This is not available depending on the Effect Type. General For details on the Side Chain/Modulator, see the Routing display of the Normal Part (AWM2) (page...
  • Page 150 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Common/Audio Edit Motion Seq (Motion Sequencer) Common/Audio General Common Audio In Mixing From the Common display you can set the parameters related to Motion Sequencer commonly used for all Parts in Common/Audio Part.
  • Page 151 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Common/Audio Edit Common Motion Seq Shape (Common Motion Sequencer Pulse Shape) Determines the Pulse Shape of the Motion Sequencer for the entire Performance. This changes the step Common/Audio curve shape of the sequence.
  • Page 152 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Common/Audio Edit Control Common/Audio General Control Assign Audio In Mixing [PERFORMANCE]  [EDIT]  PART [COMMON]  [Control]  [Control Assign] Operation Routing Ins A Ins B Motion Seq Common...
  • Page 153 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Common/Audio Edit Control Number Common/Audio Determines the MIDI Control Change numbers common for the entire system. You can use the Knobs on General the front panel and external controllers by assigning appropriate MIDI Control Change numbers. Audio In NOTE External controllers include external sequencers and external MIDI controllers.
  • Page 154 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Common/Audio Edit MS Hold (Motion Sequencer Hold Control Number) Determines the Control Change Number generated by using the [MOTION SEQ HOLD] (Motion Common/Audio Sequencer Hold) button. General Even when the instrument receives MIDI messages with the same Control Change Number specified here from the external equipment, the instrument assumes that the message is generated by operating the...
  • Page 155 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Common/Audio Edit Category (Variation/Reverb/Master Effect Category) Type (Variation/Reverb/Master Effect Type) Common/Audio Determines the category and type for the selected effect. General Settings: For details on the editable Effect categories and types, see the Data List PDF document. Also, for details on the Audio In description for each Effect type, see the Synthesizer Parameter Manual PDF document.
  • Page 156 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Common/Audio Edit Variation Common/Audio From this display you can determine the detailed settings of the Variation effect. General Audio In [PERFORMANCE]  [EDIT]  PART [COMMON]  [Effect]  [Variation] Operation Mixing Routing...
  • Page 157 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Common/Audio Edit Reverb Common/Audio From this display you can determine the detailed settings of the Reverb effect. General Audio In [PERFORMANCE]  [EDIT]  PART [COMMON]  [Effect]  [Reverb] Operation Mixing Routing...
  • Page 158 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Common/Audio Edit Master FX (Master Effect) Common/Audio From this display you can determine the detailed settings of the Master Effect. General Audio In [PERFORMANCE]  [EDIT]  PART [COMMON]  [Effect]  [Master FX] Operation Mixing Routing...
  • Page 159 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Common/Audio Edit Master EQ (Master Equalizer) Common/Audio From this display you can set parameters related to the Master EQ. General Audio In [PERFORMANCE]  [EDIT]  PART [COMMON]  [Effect]  [Master EQ] Operation Mixing Routing...
  • Page 160 Reference Performance Edit Search Utility Live Set Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio Common/Audio Edit Mid Freq (Master EQ Mid Frequency) Determines the frequency for the Master Mid band. Common/Audio Settings: 100Hz – 10kHz General Hi Mid Freq (Master EQ High Mid Frequency) Audio In Determines the frequency for the Master High Mid band.

  • Page 161: Category Search

    Reference Performance Edit Search Utility Live Set Search Category Search Performance Category The Performances/Arpeggios/Waveforms are conveniently divided into specific Categories. The Arp Category categories are divided based on the general instrument type or sound characteristics. The Category Waveform Search function gives you quick access to the sounds you want. Performance Category Search From the Performance Category Search display you can search and select the Performance.
  • Page 162 Reference Performance Edit Search Utility Live Set Search Sort (Sort Order) Determines the Sort Order of the Performance List. Performance Category Settings: Default, Name, Date Arp Category Name: Sorts by name. When the lower arrow is displayed, the List is arranged in ascending order (A to Z). When the Waveform upper arrow is displayed, the List is arranged in descending order.

  • Page 163: Arpeggio Category Search (Arp Category Search)

    Reference Performance Edit Search Utility Live Set Search Arpeggio Category Search (Arp Category Search) From the Arpeggio Category Search display you can search and select Arpeggio Types. Performance Category Arp Category Arpeggio related display  Part selection  [CATEGORY] Operation Waveform Name Search Arpeggio Type list...

  • Page 164: Waveform Category Search (Waveform Search)

    Reference Performance Edit Search Utility Live Set Search Waveform Category Search (Waveform Search) From the Waveform Category Search display you can search and select the Waveforms. Performance Category Arp Category Waveform related display  Part selection  Waveform selection  [CATEGORY] Operation Waveform Name Search...

  • Page 165: Utility

    Reference Performance Edit Search Utility Live Set Uitlity Utility Settings The Utility display has four tabs; the Setting tab, the Contents tab, the Tempo Settings tab, and the Effect Sound Switch tab. You can make various settings for the entire system. Quick Setup Audio I/O Settings...
  • Page 166 Reference Performance Edit Search Utility Live Set Uitlity Keyboard Octave Shift Determines the amount in octaves by which the range of the keyboard is shifted up or down. This Settings parameter is linked with the OCTAVE [-]/[+] buttons on the panel. Sound Settings: -3 –...
  • Page 167 Reference Performance Edit Search Utility Live Set Uitlity Audio Signal Flow Indicates the Audio signal connections. The connections will change depending on the status of the [USB Settings TO HOST] terminal and the general settings of the instrument. Sound MIDI Signal Flow Quick Setup Indicates the MIDI signal connections.
  • Page 168 Reference Performance Edit Search Utility Live Set  Audio Rec on DAW Uitlity Use this setting when recording the signals from the tone generator and the A/D INPUT [L/MONO]/[R] Settings jacks separately to DAW software, and playing the signals from the OUTPUT [L/MONO]/[R] jacks Sound directly.

  • Page 169: Midi I/O

    Reference Performance Edit Search Utility Live Set Uitlity Assign L&R (Assign L&R Output Gain) Determines the output gain of the ASSIGNABLE OUTPUT (BALANCED) [L]/[R] jacks. Settings Settings: -6dB, +0dB, +6dB, +12dB Sound USB Main (USB Main L&R Output Gain) Quick Setup Determines the output gain of the Main L&R channel of the [USB TO HOST] terminal.
  • Page 170 Reference Performance Edit Search Utility Live Set Uitlity Arp MIDI Out (Arpeggio MIDI Out) Determines whether to output MIDI data of Arpeggio playback or not. Settings Settings: Off, On Sound MIDI Sync Quick Setup You can set various parameters related to MIDI clock and synchronization here. Audio I/O Determines whether Arpeggio/Motion Sequencer/Song playback will be synchronized to the instrument’s MIDI I/O...
  • Page 171 Reference Performance Edit Search Utility Live Set Uitlity Advanced Settings Sound From the Advanced display you can set the advanced parameters. Quick Setup [UTILITY]  [Settings]  [Advanced] Operation Audio I/O MIDI I/O Advanced System Contents Load Store / Save Data Utility Tempo Settings Effect Switch...
  • Page 172 Reference Performance Edit Search Utility Live Set Uitlity Event Chase (Song Event Chase) Event Chase allows you to specify which non-note data types are properly recognized during fast-forward Settings and rewind operations. Setting this to a specific event ensures the playback integrity of the event, even Sound when fast forwarding or rewinding.
  • Page 173 Reference Performance Edit Search Utility Live Set Uitlity Blur (Blur Switch) When any display is selected, the display previously selected is blurred. This parameter determines Settings whether the Blur function is turned on or off. Sound Settings: Off, On Quick Setup Beep (Beep Switch) Audio I/O Determines whether the beep sound (that confirms operations, menu/parameter selection, etc.) is turned...
  • Page 174 Reference Performance Edit Search Utility Live Set Uitlity Contents Settings Sound Load Quick Setup Audio I/O From the Load display you can load files and data. MIDI I/O [UTILITY]  [Contents]  [Load] Operation Advanced System Parent Folder Name Current Folder Name Free Storage Contents Load...
  • Page 175 Reference Performance Edit Search Utility Live Set Uitlity File Types Device Type Extension Description Settings Song&Perf Internal data A specified Song in a file that is saved to the dedicated area in the User Memory as a “Song” type can be Sound individually selected and loaded (played back) to the Quick Setup...
  • Page 176 Reference Performance Edit Search Utility Live Set Uitlity Compatible with the MOTIF XF6/MOTIF XF7/MOTIF XF8 data The following data can be loaded to MONTAGE6/MONTAGE7/MONTAGE8 among all MOTIF XF6/MOTIF Settings XF7/MOTIF XF8 data. Please note that the data is loaded as “User File” or “Library File.” Sound Also you can switch the Content Type between User file and Library file.
  • Page 177 Reference Performance Edit Search Utility Live Set Uitlity File Types Device Type Extension Description Settings User File File .X7U Data that is stored to the dedicated area in the User Memory can be saved to USB flash memory. Sound Data saved as “User File” is as follows. Quick Setup •...
  • Page 178 Reference Performance Edit Search Utility Live Set Uitlity Job (Job Switch) Determines whether the Job function is active (On) or not (Off.) When this parameter is turned on, touching Settings the File/Folder/Content in “File Select” calls up the menu to select “Rename” or “Delete.” Sound Touching the currently connected USB device calls up the menu to select “Format.”...
  • Page 179 Reference Performance Edit Search Utility Live Set  When the selected Folder is opened Uitlity Parent Folder Name Current Folder Name Free Storage Settings Sound Quick Setup Audio I/O MIDI I/O Advanced System Contents Load Store / Save Data Utility Tempo Settings Effect Switch File Select...
  • Page 180 Reference Performance Edit Search Utility Live Set Uitlity Tempo Settings Settings Sound From the Tempo Settings display you can set parameters related to Tempo and Synchronization. Quick Setup [UTILITY]  [Tempo Settings], [SHIFT] + [ENTER], or Operation Audio I/O Touch the TEMPO SETTING icon MIDI I/O TEMPO SETTING icon Advanced...
  • Page 181 Reference Performance Edit Search Utility Live Set Uitlity Mode (Click Mode) Determines the click sound (metronome) that is used during recording or playback. Settings Settings: Off, Rec, Rec/Play, Always Sound Off: The click will not sound. Quick Setup Rec: The click will sound during Song recording only. Audio I/O Rec/Play: The click will sound during Song recording and playback.
  • Page 182 Reference Performance Edit Search Utility Live Set Uitlity Effect Switch Settings Sound From the Effect Switch display you can make Effect Bypass settings. None of the settings made on this display will be stored. When the instrument is restarted, the parameter values are also initialized. Quick Setup Audio I/O [UTILITY] ...

  • Page 183: Live Set

    Reference Performance Edit Search Utility Live Set Live Set Live Set Live Set Live Set is a list in which Performances can be freely arranged. Up to 16 Performances can be selected Edit from the Preset Live Sets and arranged over a single page—making it easy to call up and play your Register favorite Performances.

  • Page 184: Live Set Edit (Edit)

    Reference Performance Edit Search Utility Live Set Live Set Live Set Edit (Edit) Live Set From the Live Set Edit display you can edit the Live Sets (User Bank only). Edit [LIVE SET]  User Bank selection  [EDIT] Operation Register ...
  • Page 185 Reference Performance Edit Search Utility Live Set Live Set Swap (Swap Switch) Determines whether the Swap function is turned on or off. You can switch settings between Slots. For Live Set instructions on the Swap function, see the Owner’s Manual. Edit Settings: Off, On...

  • Page 186: Live Set Register (Register)

    Reference Performance Edit Search Utility Live Set Live Set Live Set Register (Register) Live Set From the Live Set Register display you can register Performances to the Live Set. For basic instructions on Live Set Registering, see the Owner’s Manual. Edit Register Operation...

  • Page 187: Connecting Iphone/Ipad

    Yamaha web site. NOTE For audio signal transfer, refer to the connection using Lightning to USB Camera Adapter. Details of compatible smart devices and apps can be found on the following page from the Yamaha web site. http://www.yamaha.com/kbdapps/ Yamaha Web Site (English only) http://www.yamahasynth.com/...

This manual is also suitable for:

Montage 6Montage 8

Table of Contents

Save PDF