Procedure For Editing; Procedure For Full Edit - Yamaha MONTAGE M6 Operation Manual

Procedure for editing

Editing refers to the Full Edit functions using the Main display and Quick Edit functions using the
Sub display.
You can use Full Edit to access all editing functions and use Quick Edit to instantly access some
frequently used parameters.
By using the [PAGE JUMP] button, you can edit the same parameter from Full Edit and the
Quick Edit.
Also, you can use different screens for the Main display and the Sub display to monitor multiple
parameters at once while switching between Full Edit and Quick Edit.
(1)
(2)

Procedure for Full Edit

1
Select a Performance.
2
On the Performance screen, move the cursor to the desired Performance
Name or Part.
3
Press the [EDIT/
The Common Edit screen will appear when the cursor is on the Performance Name.
The Part Edit screen for the sound engine will appear when the cursor is on the Part.
4
Select a tab on the first and the second rows to open the screen.
For selecting a tab, you can simultaneously hold down the [SHIFT] button and use the
appropriate Slot number and Category name selection buttons, or simply tap the tab on
the screen. (Refer to the Quick Guide.)
Example: Normal Part (AWM2)
Quick Edit (View the Sub display)
Full Edit (View the Main display)
] button or tap Edit in the context menu.
28