NOTE
The note numbers for Break Points 1 to 4 will be automatically arranged in ascending order.
Cutoff Offset (Filter Cutoff Scaling Offset) 1–4
Sets the value that increases or decreases the Cutoff on all four Break Points.
Settings: −128–+127
NOTE
When the offset value is set above or below the Cutoff value, the Cutoff Frequency never goes beyond
the settings.
For any notes below Break Point 1, the value will be set to the Cutoff Frequency of Break Point 1. For any
notes above Break Point 4, the value will be set to the Cutoff Frequency of Break Point 4.
Amplitude
Level/Pan
On the Level/Pan screen, you can set Level and Pan (position in the stereo field) for each
Element.
Operation
[PERFORMANCE] → [EDIT/
Level/Pan
Level/Key (Level Key Follow Sensitivity)
Sets how the volume of each Element responds to key position. The reference point is the
volume specified in Center Key.
] → Part selection → Element selection → Amplitude →
332