Yamaha MONTAGE M6 Operation Manual page 565

Message
SSS disabled.
SSS enabled.
Touch the white
square.
Turn on Memory
Switch to memorize **
into this scene.
Undo **.
Unsupported USB
device.
USB connection
terminated.
USB device is full.
USB device is write-
protected.
USB device read/write
error.
USB device will be
formatted.
User auditions will be
overwritten with stored
songs.
VCM Rotary is disabled
except in Part 1.
Voice data in *** will be
loaded.
Waveform full.
Description
SSS has been disabled.
SSS has been enabled.
(During touch panel calibration) Tap
the white square that appears on
the display.
To register a function to a Scene,
Memory (Memory Switch) for the
function must be turned on in
advance.
Cancels the last action (Undo).
The name of the operation is
displayed in place of "**."
This USB device is not supported
by this instrument.
The USB flash drive was shut off
due to abnormal current flow.
The USB flash drive is full and files
cannot be saved.
The USB flash drive you are using
is write-protected.
An error occurred during read/write
to the USB flash drive.
The USB flash drive will be
formatted.
The existing User Audition will be
overwritten by the currently stored
Song.
The VCM Rotary can be used only
with Part 1. It cannot be used on
other Parts.
The Voice Data in a file for a
previous model is loaded.
The total number of waveforms
exceeds the maximum number.
Turn on the switch from:
[PERFORMANCE] → Scene.
Disconnect the USB flash drive and then
press any button on the top panel.
Use a new USB flash drive or delete
unnecessary files, and try this operation
again.
565
Required operation