Yamaha MONTAGE M6 Operation Manual page 240

Auto Select
Sets the auto select of the Display Filter on or off.
When set to On, moving the controller you wish to set to Source automatically sets the controller
to the Display Filter.
Settings: Off, On
Display Filter
Selects the controller for showing the settings on the screen.
When you select Super Knob, all settings for Knobs 1 to 8 having the Super Knob Link set to On
will be shown.
Settings: PitchBend, ModWheel, Ch. AT, FootCtrl 1, FootCtrl 2, FootSwitch, Ribbon, Breath,
AsgnKnob 1–8, Super Knob, AsgnSw 1, AsgnSw 2, MS Lane 1–4, EnvFollow 1–16,
EnvFollowAD, EnvFollowMst, All
Display Name (Assignable Knob Name)
This allows you to enter a new name for Knobs 1 to 8 to show on the Sub display.
This parameter is not shown when Source is set to something other than AsgnKnob 1–8.
Edit Pitch Bend
Opens the General/Pitch → Pitch screen.
This parameter is not available when Source is set to something other than PitchBend.
Edit Motion Sequencer
Opens the setting screen for the Motion Sequence.
This parameter is not available when Source is set to something other than MS Lane 1–4.
Edit Envelope Follower
240