Yamaha MONTAGE M6 Operation Manual page 357

Sub Category (Waveform Sub Category)
Name (Waveform Name)
Shows the name of the Waveform selected for the Drum Key.
Bank indicates the type of Waveform (Preset, User, and Library) assigned to the Element.
Settings: Refer to the Data List.
Assign Mode (Key Assign Mode)
Sets how sound is produced when the internal tone generator receives Note On messages of
the same sound twice (or more) in a row.
Settings: Single, Multi
Single: Stops the first note and then plays the same note again.
Multi: Plays the second note over the first note. This setting makes rolls sound
natural, especially crash cymbals or other percussion instruments having a long
decay.
Connect (Drum Key Connection)
Sets the Key to be output to Insertion Effect A (InsA) or Insertion Effect B (Ins B), or bypasses
the Insertion Effect (Thru).
This parameter is basically the same as Connect (Drum Key Connection Switch) on Effect →
Routing on the Drum Part Edit (AWM2.)
Settings: Thru, InsA, InsB
New Waveform
Loads an audio file saved to USB flash drive as a Waveform.
Edit Waveform appears when a Waveform is loaded.
Edit Waveform
Opens the Waveform Edit screen.
Coarse (Coarse Tune)
Shifts the pitch of the waveform assigned to the Drum Key.
Settings: −48–+48
Fine (Fine Tune)
Finely adjusts the pitch of the wave assigned to the Drum Key.
Settings: −64–+63
Pitch/Vel (Pitch Velocity Sensitivity)
Sets how the pitch responds to Velocity or the strength of the keystroke.
357