Table of Contents
Advertisement
Sets the pan for transmitting the Performance selection.
This parameter is not available when the Transmit Pan is set to Off.
Settings: L64–C–R63
Edit Tx/Rx Switch
Opens the Tx/Rx Switch screen.
Element Settings
Sets the maximum number of Elements to use.
Operation
[PERFORMANCE] → Part Common selection → [EDIT/
] → General/Pitch → Element
Settings
Ex Elem Sw (Extended Element Switch)
Enables the extension of Element capacity.
When set to Off, only up to eight elements are available.
Settings: Off, On
Element Count
Sets the maximum number of elements to use.
Settings: 8–128
NOTE
Even when Element Sw is set to Off, the number set in Element Count is saved.
258
Advertisement
Chapters
Table of Contents
