Yamaha MONTAGE M6 Operation Manual page 118

Adds special tonal variation in the sound by adjusting the signal level near the cutoff frequency.
This is specified as an offset value to the filter resonance set on the Filter Type screen.
Settings: −64–+63
FEG (Part FEG Depth)
Sets the range of the cutoff frequency change controlled by the Filter EG setting in the Filter
Type screen.
When it is set to 0, the settings in the Filter Type screen will be used as is.
Settings: −64–+63
Changing the View Mode
You can access more detailed information from the Home screen by using View Mode.
You can select a different View Mode by moving the corresponding display knob.
When the cursor is on the Performance Name, pressing the [PERFORMANCE] button also
changes the view.
Element Sw/Level
Shown when the View Mode is set to Part Info and the current Part is a Normal Part (AWM2).
(1)
(2)
Element Sw (Element Switch)
Switches the Element On or Off.
Settings: Off, On
Element Sw (Element Switch)
Element Level
118