Yamaha MONTAGE M6 Operation Manual page 126

Motion Seq Master Sw (Motion Sequencer Master Switch)
Sets the Motion Sequencer for the entire Performance on or off.
This switch is linked to the [MSEQ ON/OFF] button on the top panel.
Settings: Off, On
Super Knob MS Sw (Super Knob Motion Sequencer Switch)
Sets the Super Knob Motion Sequencer on or off.
Settings: Off, On
MS FX (Super Knob Motion Sequencer FX Receive)
Sets Knobs to be affected by the operation of the Super Knob.
Settings: Off, On
Trigger (Super Knob Motion Sequencer Trigger Receive)
Sets to receive the signals from the [MSEQ TRIGGER] button.
When set to On, the Motion Sequence will not be played back unless you press the [MSEQ
TRIGGER] button.
Settings: Off, On
Sequence Select (Motion Sequence Select)
Changes the Motion Sequence type selection.
Settings: 1–8
SK MS Random (Super Knob Motion Sequencer Randomness)
Sets randomness of the changes in the Step value of the sequence.
Settings: 0–127
126