Yamaha MONTAGE M6 Operation Manual page 124

(3)
(4)
(5)
MS Master (Motion Sequencer Master Switch)
Sets the Motion Sequencer for the entire Performance on or off.
This switch is linked to the [MSEQ ON/OFF] button on the top panel.
Settings: Off, On
Super Knob MS (Super Knob Motion Sequencer Switch)
Sets the Motion Sequencer used for the Super Knob on or off.
Settings: Off, On
LED Pattern
Sets the lighting pattern of the Super knob.
Settings: Off, Type 1, Type 2-1, Type 2-2, Type 3-1, Type 3-2, Type 4-1, Type 4-2, Type 5-1,
Type 5-2, Type 6, Type 7-1, Type 7-2, Type 8-1, Type 8-2, Type 9, Type 10, Type 11,
Type 1B, Type 2-1B, Type 2-2B, Type 3-1B, Type 3-2B, Type 4-1B, Type 4-2B, Type
5-1B, Type 5-2B, Type 6B, Type 7-1B, Type 7-2B, Type 8-1B, Type 8-2B, Type 9B,
Type 10B, Type 11B, Rotary 1, Rotary 2, Rotary 3, Rotary 4, Rotary 5, Rotary 6,
Rotary 7, Rotary 8, Rotary 9, Rotary 10
Super Knob (Super Knob Value)
Sets the Super Knob value.
Settings: 0–1023
Mid Position
Set the Mid value for the Super Knob.
Settings: Off, 1–1022
Edit Super Knob
Opens the Common Edit Control Assign screen for setting the parameters controlled by the
Super Knob.
Super Knob Link
Sets the corresponding knob to link to the Super Knob.
When these switches are set to Off, the operation of the Super Knob will not affect the
parameter of the knob.
Settings: Off, On
Assignable Knob 1–8 Value Left
Assignable Knob 1–8 Value Mid
Assignable Knob 1–8 Value Right
124