Yamaha MONTAGE M6 Operation Manual page 383

Operator Edit
Contents
Form/Freq
Level
Algorithm Search
Form/Freq
On the Form/Freq screen, you can set the waveform and frequency of the Operator.
Operation
[PERFORMANCE] → [EDIT/
Attack Time (PEG Attack Time)
Sets the length of time it takes for the pitch to reach the value set at the Attack Level.
Settings: 0–99
Decay Time (PEG Decay Time)
Sets the length of time it takes for the pitch to change from the value set at the Attack Level to
the moment the PEG changes to the value 0.
Settings: 0–99
] → Part selection → Operator selection → Form/Freq
383
om02screenparameters0150