Yamaha MONTAGE M6 Operation Manual page 468

Sets the Control Change number generated by the operation of the Super Knob.
When this instrument receives the MIDI message with the same Control Change number
specified here from the external device, the instrument will act as if the Super Knob has been
operated.
Settings: Off, 1–95
NOTE
When this parameter is set to Off, the System Exclusive (SysEx) is used for handling MIDI messages.
Scene CC (Scene Control Change Number)
Sets the Control Change number generated when you switch between Scenes.
Also, Scene will change when a MIDI message with the same Control Change number set here
is received from the external MIDI device.
Settings: Off, 1–95
NOTE
Depending on the Control Change number, one of the Scenes 1–8 will be selected.
0–15: Scene 1, 16–31: Scene 2, 32–47: Scene 3, 48–63: Scene 4, 64–79: Scene 5, 80–95: Scene 6, 96–
111: Scene 7, 112–127: Scene 8
If the Super Knob Control Change number and the Scene Control Change number are set to the same
value, an exclamation mark appears in front of the number. In that case, the Scene Control Change takes
priority, and the Super Knob Control Change is disabled.
Control Number
Opens the Control → Control Number screen for the Common Edit.
Advanced
On the Advanced screen, you can set the detailed settings for the instrument.
Operation
[UTILITY] → Settings → Advanced
468