Message List - Yamaha MONTAGE M6 Operation Manual

Message List

Message
** library will be
overwritten.
** Control Assign full.
** will be deleted.
** will be loaded to
Pattern.
** will be loaded to
Song.
** will be loaded.
** will be overwritten.
Activate the source
controller to assign.
Advanced settings will
be initialized.
Description
The Library file with the same
name has already been loaded
when you tried to load a library. The
existing data will be overwritten
when the new data is loaded.
The name of the Library file you are
attempting to load is displayed in
place of **.
Could not carry out the operation
because there is no controller set
available. The Part name you are
attempting to add to the controller
set is displayed in place of "**."
Data will be deleted as a result of
this operation.
The .mid file will be loaded to the
Pattern.
The .mid file will be loaded to the
Song.
The file will be loaded.
When saving, the Performance,
file, folder, or Quick Setup with the
same name already exists. The
existing data will be overwritten
when saved.
The name of the Performance, file,
folder, or Quick Setup that you are
attempting to save is displayed in
place of "**."
You can assign parameters to the
controller you are about to operate.
Initializes the settings of the
[UTILITY] → Settings → Advanced
tab.
Delete the unnecessary controller set and
redo the operation.
Operate the controller that you wish to
assign.
558
om02screenparameters0470
Required operation