Changing The Way Motion Sequence Is Triggered; Editing The Motion Sequence - Yamaha MONTAGE M6 Operation Manual

Sequence, you can then use Knobs 1 to 8 to change the Motion Sequencer.
Modify the Motion Sequencer settings by turning the knobs and listening to the Motion
Sequencer playback. Check the names of the parameters assigned to Knobs 1 to 8 on the Sub
display.

Changing the way Motion Sequence is triggered

The way Motion Sequence is triggered can be set with the LaneSw and Trigger parameters.
LaneSw, Trigger
[PERFORMANCE] → Part selection → [EDIT/
Plays back the Motion Sequence when you press a key
Plays back the Motion Sequence when you press the [MSEQ TRIGGER] button

Editing the Motion Sequence

Motion Sequence is comprised of up to 16 steps.
Edit each Step from the Edit Sequence screen.
] → Motion Seq → Lane
46
LaneSw: On
Trigger: Off
LaneSw: On
Trigger: On
Sync: Other than Arp