Yamaha MONTAGE M6 Operation Manual page 308

Random.
Producing sounds unique to acoustic instruments
Some examples of sound unique to acoustic instruments include harmonics and palm mute
on the guitar, flutter-tonguing on the flute, and growl on the saxophone.
Set up an Element with XA Control set to A.Sw1 On or A.Sw2 On, or A.Sw Off, and control
from the [ASSIGN 1] and [ASSIGN 2] buttons on the top panel.
NOTE
The [ASSIGN 1] and [ASSIGN 2] buttons can be set to On or Off by sending the Control Change number set
in the Control → Control Number of the Common Audio Edit screen from an external device.
Settings: Normal, Legato, Key Off, Cycle, Random, A.Sw1 On, A.Sw2 On, A.Sw Off
Normal: Played as a normal Element.
Legato: Played when Mono/Poly is set to Mono. When you play in Legato, the
Element set to Legato will be played instead of the Element set to Normal.
Key Off: Played when a finger is lifted off from the key.
Cycle: Played when there are a series of Elements set in Cycle.
Random: Plays the Elements randomly when multiple Elements are set to Random.
A.Sw Off: Played when both [ASSIGN 1] and [ASSIGN 2] buttons are set to Off.
A.Sw1 On: Played when the [ASSIGN 1] button is set to On.
A.Sw2 On: Played when the [ASSIGN 2] button is set to On.
Elem Group (Element Group Number)
This parameter is for sorting Elements having the same XA Control setting into groups.
When XA Control of all Elements is set to Normal, this setting is not effective.
Settings: 1–8
Elem Connect (Element Connection Switch)
Sets the output of the Element to Insertion Effect A or Insertion Effect B.
Setting it to Thru bypasses the Insertion Effects.
Settings: Thru, InsA, InsB
New Waveform
Loads the audio file saved on the USB flash drive as a Waveform.
Edit Waveform appears when a Waveform is loaded.
Edit Waveform
Opens the Waveform Edit screen.
Coarse (Course Tune)
Shifts the pitch of the Element in semitones.
308