Connections
Power-on Procedure
14
1 . Setting Up Your System
The diagram below shows the basic connections in a setup using only the SY35
and a stereo sound system.
Make sure that both the SY35 and your sound system are turned
OFF when making connections.
Believe it or not, there's actually a "right" way to turn on a sound system that
will minimize the possibility of damage to the equipment (and your ears!).
Make sure your sound system's volume control and the SY35 volume con-
trol are turned all the way down prior to turning power on.
Turn on the SY35.
Turn on the sound system.
Raise the sound system volume to a reasonable level.
Gradually raise the SY35 VOLUME control while playing the keyboard to
set the desired listening level.