Yamaha MONTAGE M6 Operation Manual page 370

Sets the length of time it takes for the pitch to change from the Decay 1 Level to the Decay 2
Level.
Settings: 0–99
Release Time (PEG Release Time)
Sets the length of time it takes for the pitch to change from the moment you have released the
key until it reaches the Release Level.
Settings: 0–99
Initial Level (PEG Initial Level)
Sets the pitch for the moment you press the key.
Settings: −50–+50
Attack Level (PEG Attack Level)
Sets the pitch to change from Initial Level after you have pressed a key.
Settings: −50–+50
Decay1 Level (PEG Decay 1 Level)
Sets the next pitch value to change from the Attack Level.
Settings: −50–+50
Decay2 Level (PEG Decay 2 Level)
Sets the next pitch value to change from the Decay 1 Level.
Settings: −50–+50
Release Level (PEG Release Level)
Sets the final pitch to reach after you have released the key.
Settings: −50–+50
PEG Depth
Sets the amount of pitch change controlled by the PEG.
Settings: 8 oct, 2 oct, 1 oct, 0.5 oct
For example, when this parameter is set to 8 oct, you can specify the smallest value
to the Pitch EG level to create a pitch change of −4 octaves by sending the pitch
value 0 to the internal tone generator, and by specifying the largest value to create a
pitch change of +4 octaves.
Depth/Vel (PEG Depth Velocity Sensitivity)
Sets how the time of the pitch change in PEG responds to Velocity or the strength of the
keystroke.
370