Amp Eg; 3-Band Eq - Yamaha MONTAGE M6 Operation Manual

Amp EG

The screen here is the same as the one opened from Filter/Amp → Amp EG on the Part Edit
(AWM2).
Effect
Routing
The screen here is basically the same as the one opened from Effect → Routing on the Part
Edit (AWM2); however, there are a few differences as shown below.
No output setting for each Element
Cannot select Parallel for Ins Connect
Ins A
Ins B
The screen here is the same as the one opened from Effect → InsA or InsB on the Part Edit
(AWM2).

3-band EQ

The screen here is the same as the one opened from Effect → 3-band EQ on the Part Edit
(AWM2).
2-band EQ
The screen here is the same as the one opened from Effect → 2-band EQ on the Part Edit
(AWM2).
Arpeggio
Common
The screen here is the same as the one opened from Arpeggio → Common on the Part Edit
(AWM2).
372