Active Menu: Functions And Dialog Boxes - Kongsberg Simrad SN90 Reference Manual

Active menu: functions and dialog boxes

The menu offers parameters related to current views and data presentations
Active
provided by the SN90 system.
How to open
Select the icon.
Active
The icon is located under the
icon one more time to close the menu.
The choices in this menu depends on which view in
the display presentation that is currently "active". The
menu may therefore change from one view to another.
The name of the currently active view is identified at
the top of the menu. The screen capture may not show
you all the menu choices.
Note
Before you can change the settings related to a view,
you must click inside the view to activate it. The
changes you make are by default only valid for the
active view.
Several of the functions offer
your setting is applied to all the views in the current presentation mode.
Apply to All
Topics
TVG function, page 464
Ping-Ping Filter function, page 466
Pulse Type function, page 468
Bandwidth function, page 471
Frequency function, page 472
Horizontal TX Sector function, page 474
Vertical TX Sector function, page 477
Range Projection function, page 478
AGC (Automatic Gain Control) function, page 479
RCG (Reverberation Controlled Gain) function, page 482
Target Threshold function, page 484
Noise Filter function, page 485
381294/E
menu. Select the
Main
. If you select
Apply to All
Functions and dialog boxes
463