Table of Contents
Advertisement
c
Observe that the
d
Select
Network & Internet
e
Select
Change adapter options
f
Select the relevant network adapter, then right-click and select
the short-cut menu.
g
On the list of connections, select
.
Properties
h
Observe the IP address for the Ethernet adapter.
i
Write down the information.
j
Close all the dialog boxes.
Obtain the MAC address.
a
In the bottom left corner of your desktop, select the looking glass to start
a search.
b
Type "Command", do the search, and open the
c
Type ipconfig /all and press the
d
Observe the "Physical Address" (MAC address) for the relevant Ethernet
adapter.
e
Write down the information.
f
Close the
Command Prompt
Select the adapter that the Operating Panel is connected to. On the SN90 system,
the Ethernet adapter is named Simrad Connect.
4
Add a single Processor Unit to the Operating Panel configuration.
a
Select
Sonar PCs Configuration
b
Type or copy the IP address into the relevant box.
c
Type or copy the MAC address into the relevant box.
d
Select
ADD Sonar PC
e
Observe that your Processor Unit is added to the list.
f
Close the web browser.
5
Make sure that the Operating Panel is functional.
a
Make sure that the blue indicator is lit, and check that you can move the
cursor on the screen.
b
On the computer desktop, double-click the SN90 icon to start the program.
381294/E
dialog box opens.
Windows Settings
.
.
Internet Protocol 4 (TCP/IPv4)
Enter
window.
on the top menu to open the page.
.
Maintenance procedures
Command Prompt
key.
on
Properties
, and then
window.
247
Advertisement
Chapters
Table of Contents
