Kongsberg Simrad SN90 Reference Manual page 75

Purse seine and trawling sonar

Hide thumbs Also See for Simrad SN90:

Table of Contents

Click in the view you want to activate.

The active view is identified with a thicker border. Unless you use the

function, all changes you make will only be applied to this view.

Use the joystick to make the adjustment.

Optionally: Turn the relevant rotary switch to make the adjustment.

The Mk2 Operating Panel is fitted with three rotary switches. The switches are

identified with numbers. Each switch can be assigned a function related to range,

gain, bearing or tilt. Investigate the functionality provided on the

page. This page is located in the

In a Horizontal view, select the bearing line and drag it sideways.

Its default location is on the right side of the display presentation.

Make the necessary adjustment.

The following methods can be used to adjust this setting:

Select [+] or [-] to choose the requested setting.

Place the cursor on the button. Press and hold the left mouse button. Move the

cursor horizontally over the button. Release the mouse button when requested

value is shown.

Select the middle of the button to open it. If you have a keyboard connected to

the SN90 system, type the requested value.

Open the button and select

the views in the current presentation mode.

Chapters

Table of Contents