Simrad SN90 Reference Manual
Description
Select the output type from the list, and then where to save the files. Select
save your choices.
Note
The data files will normally become very large. If you wish to record large amounts of
data, make sure that you have enough space on your hard disk. Unless your computer is
equipped with a very large disk, we recommend that you save the data to an external
storage device.
Once an output type has been defined, it is listed in the
side of the page. To remove or edit an output type, select it in the
Select
to change the settings. Select
Edit
Starting and stopping the recording of processed data
To start and stop recording of processed data, use the
the
menu.
Operation
Details
Installed Outputs
The
Installed Outputs
an output type, select it in the
• Select
Remove
• Select
to change the settings.
Edit
• Select
New
516
box lists all the currently selected outputs. To remove or edit
Installed Outputs
to delete the output.
to add a new output.
Installed Outputs
to delete the output.
Remove
Record Processed
box.
to
Add
box on the left
box.
Installed Outputs
function on
381294/E