Kongsberg Simrad SN90 Reference Manual page 46

Simrad SN90 Reference Manual
use your Operating Panel to control more than two sonars, press
repeatedly to select.
(C) /
User Settings Presentation Modes
On the Mk2 Operating Panel, the four buttons dedicated for user settings or
presentation modes are located the top of the panel. To choose which function
to apply open the
predefined setting to each button on the Operating Panel. Before you can assign
custom user settings to the operating panel, a selection of settings must be available
from the
User Settings
dialog box.
Installation
User Settings
Press one of the
Any user setting selected on the Operating Panel is identified in the upper
left corner of the Horizontal view. The identifying number refers to the
number on the
Setting
larger. Click one more time to restore the original font size.
Presentation Modes
All echoes offered by the SN90 system are shown in rectangular views.
Combinations of these views are organized in presentation modes. Each
presentation mode offered by the SN90 system provides a selection of
views in a predefined pattern. You must first find the presentation mode
that meets your operational requirements, then you can change the size of
the individual views.
(D) /
F1 F2 F3 Screen Capture
F1 F2 F3
Press one of the
function to apply open the
assign one function to each
Screen Capture
Press
Screen Capture
can choose either a single screen capture or a sequence with multiple screen
captures. Open the
Use
Screen Capture File Location
(E)
Joystick
Press the joystick forward to increase the tilt angle in the active view. Turn the
button on the top of the joystick to change the bearing in the active view.
(F)
Mouse buttons
These buttons correspond to the two most common buttons on a standard computer
mouse. When an instruction tells you to "select" or "left-click", press the left
button. When an instruction tells you to "right-click", press the right button.
44
page. Under
Operating Panel
dialog box. The
buttons to apply a predefined user setting.
User Settings
Operating Panel
buttons to apply a predefined function. To choose which
Fx
Operating Panel
button on the Operating Panel.
Fx
to make a copy of the current display presentation. You
Screen Captures
User Setting Buttons
page is located in the
Operating Panel
page. Click on the text to make it
page. Under
dialog box to select screen capture mode.
to define where to save your screen captures.
Sonar Select
, assign one
User
,
Button Options
381294/E