Table of Contents
Advertisement
Output
Select the file format you want to export.
Current Output Folder
This text box shows you the file path that is currently used to store the data files.
Select
to choose a different output folder to store the files. This function
Browse
uses a standard operating system dialog box. You are permitted to create a new
folder.
In order to change the output directory, both
must be set to Off.
File Name Prefix
Define a file name prefix. By adding a prefix to the file names you can identify
the files you have recorded during a specific survey. Type any text into the box.
The chosen text will be used as prefix on all the file names. Observe the file name
limitations in the operating system.
Maximum File Size
Define the maximum amount of bytes to be contained in one data file.
The data files will normally become very large. If you wish to record large
amounts of data, make sure that you have enough space on your hard disk. The
SN90 system is not provided with unlimited disk capacity. We recommend that
you either save the data files to an external storage device, or use a network disk.
Min(imum) Free Disk Space
This is a safety feature to prevent you to from filling your entire hard disk with
data. Type the minimum space you wish to keep free on your hard disk. If this
limit is reached, the recording of processed data will stop automatically. A relevant
message is posted in the
Add
Select
to allow export of the chosen data format. Once an output type has been
Add
defined, it is listed in the
data recording, open the
simply select the red circle on the right side of the button.
Remove
Once an output type has been defined, it is listed in the
the left side of the page. To remove the output, select the relevant format under
Installed Outputs
Edit
Once an output type has been defined, it is listed in the
left side of the page. To change the output settings, select the relevant format under
Installed Outputs
381294/E
dialog box.
Messages
Installed Outputs
Record Processed
, then select
.
Remove
, then select
. Select
Edit
Functions and dialog boxes
and
Record
Record Processed
box on the left side of the page. To start
button, and select On. Alternatively,
Installed Outputs
Installed Outputs
to keep the changes you have made.
Save
recording
box on
box on the
517
Advertisement
Chapters
Table of Contents
