Table of Contents
Advertisement
Simrad SN90 Reference Manual
Objects list
Once an echo has been provided with a marker in the display presentation it is
regarded as an object. The table at the top of the
objects that are currently identified with markers. Each marked object is listed
with the following information:
•
: This is the unique identification of each object marker.
ID
Each marker is numbered sequentially.
Objects with allocated markers are identified with an "M" in the
Objects that are subjected to target tracking are identified with a "T". You can
give priority status to one marker to identify the relevant object as the most
important target or position. The priority is identified with a "P".
•
: This is the range (in metres) from the vessel and to the object identified
R
with the marker.
•
: This is the true bearing to the object.
B
•
: This is the object's depth (in metres) relative to the sea surface.
D
Each marker is specified by its geographical position (latitude and longitude) and
its depth. Additional information is provided for objects that are subjected to
target tracking.
• Select the check box on the left side of any object to mark it for deletion,
or to save it.
• Select the object line to activate the control buttons, and to retrieve information
about the object.
Select All
Click
Select All
Delete
Select
to delete all the markers you have selected in the objects list. Each
Delete
marker is removed both from the list and from the SN90 presentation.
New
Select
to add a new marker manually. The
New
accept position and depth information.
Export/Import
Once you have defined any number of objects, these can be saved to a file on the
hard disk. If necessary, you can later retrieve the file for reuse. The file format is
XML. The file is located in the following folder:
c:\ProgramData\Simrad\SN90\Markers
•
To External
•
: Select
To File
name is built automatically using date and time information.
402
to select all the markers in the list
: This function is not implemented on the SN90 system.
to save the currently selected objects to a file. The file
To File
menu shows you all the
Objects
Objects
dialog box opens to
New Marker
menu.
381294/E
Advertisement
Chapters
Table of Contents
