Table of Contents
Advertisement
• Ethernet switch
Make sure that your selected Ethernet switch has a large bandwidth capacity.
Minimum 1 Gb (1000BASE-T) is required.
• Ethernet cables
It is very important that high-quality Ethernet cables are used. You must use
Cat 5e STP (Shielded Twisted Pair) quality or better.
Neither tools nor instruments are required.
Context
When supplied, the Operating Panel is set up with the following communication
parameters:
•
SN90 (Purse seine installations)
157.237.60.20
AC:1F:6B:1D:42:E6
•
SN90 (Trawl installations)
157.237.60.11
1F:33:9C:23:A3:65
The IP and MAC addresses for your Processor Unit are contained in a text file named
IPandMACaddress.txt
in the following format (example):
SN90
157.237.60.14
AC:1F:6B:1D:42:E6
Tip
If the distance between the Processor Unit and your second display is considerable, we
suggest that you use KVM (Keyboard Video Mouse) technology to preserve the video
quality.
Procedure
1
Make the following preparations.
a
On the Processor Unit, close any programs that are running, and return to
the desktop.
b
Insert the Ethernet switch between the Operating Panel and the Processor Unit.
Make sure that you use the correct Ethernet socket on the rear side of the
computer: ETH1
c
Install the secondary Operating Panel.
d
Connect the Operating Panel to AC mains.
381294/E
or
. The file contains the product name, IP address and MAC address
Maintenance procedures
241
Advertisement
Chapters
Table of Contents
