Kongsberg Simrad SN90 Reference Manual page 575

The Kongsberg EM Attitude 3000 is a proprietary datagram format created by
Kongsberg Discovery for use with digital motion sensors. It holds roll, pitch,
heave and heading information.
Baud Rate
Use this setting to specify the baud rate ("speed") for the serial communication.
Status
The current status of the sensor communication is shown. "Not connected" means
that the input from the sensor is missing. A message like this (example) verifies
that the SN90 system is connected to the built-in motion sensor:
Connected to 192.168.1.30 SN90 Beamformer
Related functionality
Stabilization
The
Stabilization
sensor. If you disable the input from the sensor, the beams will not be compensated
for pitch and roll movements. This function is opened from the
Related topics
Setting up the interfaces to peripheral devices, page 195
Functions and dialog boxes, page 416
Setup menu: functions and dialog boxes, page 448
Installation dialog box, page 461
381294/E
function allows you to enable or disable the input from the motion
Functions and dialog boxes
menu.
Setup
573