Table of Contents
Advertisement
Simrad SN90 Reference Manual
a
Set the switch to position LOWER.
Lowering is automatically stopped when the
If necessary, the transducer can be stopped in any position by setting the
Hoist/Lower Switch
b
Set the switch to position STOP.
5
Hoisting the transducer:
a
Set the switch to position HOIST.
Hoisting is automatically stopped when the
If necessary, the transducer can be stopped in any position by setting the
Hoist/Lower Switch
b
Set the switch to position STOP.
6
Locate the
Hoist/Lower Switch
Note
For normal operation from the Operating Panel, the switch must be set to REMOTE.
7
Close the cabinet door.
190
to STOP.
to STOP.
(S302). Set the switch to position REMOTE.
is activated.
Lower Limit Switch
is activated.
Upper Limit Switch
381294/E
Advertisement
Chapters
Table of Contents
